Page 1
INSTALLATION AND USING INSTRUCTIONS CERAMIC FAN HEATER SPLITTO...
Page 2
G E N E R A L C A R E A N D S A FE TY G U ID E Read all instructions before using this appliance and keep them for future reference. Use only the voltage specified on the rating plate of the fan heater. ...
Page 3
D o not tw ist, kink or w rap the cord around the appliance, as this m ay cause the insulation to w eaken and split. Always ensure that all cord has been rem oved from any cord storage area before use. ...
Page 4
Figure 2 Figure 3 2. Drill two holes suit to the dimension of expansible tube in the proper wall (See figure 2). SPLITTO: D= 470 mm 3. Insert the expansible tubes into the holes and tighten them with screws provided firmly.
Page 5
INSTRUCTIONS FOR USE Turn off all the controls of the fan heater, and then plug the power plug directly into a standard grounded AC outlet. Be sure plug fits tightly into outlet. The fan heater includes an overheat protection system that shuts off the appliance when parts of it are getting too hot.
Page 6
MAINTENANCE INSTRUCTIONS 1. Always remove the plug from the socket-outlet and allow the fan heater cool down before cleaning it. 2. Use a damp cloth to w ipe the exterior of the fan heater to remove dust and dirt. 3. Do not let w ater go into the appliance. 4.
Page 7
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE 2002/96/EC At the end of its working life this equipment must not be disposed of as an household waste. It must be taken to special local community waste collection centres or to a dealer providing this service. Disposing of an electrical and electronic equipment separately avoids possible negative effects on the environment and human health deriving from an inappropriate disposal and enables its components to be recovered and recycled to obtain significant savings in energy and resources.
Need help?
Do you have a question about the SPLITTO and is the answer not in the manual?
Questions and answers