Download Print this page
Argo HUGO User Manual

Argo HUGO User Manual

Plug-in personal ceramic fan heater

Advertisement

Quick Links

PLUG-IN PERSONAL CERAMIC FAN HEATER
This product is only suitable for well
insulated spaces or occasional use.
The front metal grill becomes very hot
during use. Therefore avoid contact of
unprotected skin with the hot surface.
Read the instructions carefully before installing and operating the appliance or
performing maintenance operations. Observe all the safety instructions; failure
to observe the instructions may cause accidents and/or damages. Store these
instructions for future reference.
V 06/18
OPERATING INSTRUCTIONS
EN
14

Advertisement

loading
Need help?

Need help?

Do you have a question about the HUGO and is the answer not in the manual?

Questions and answers

Summary of Contents for Argo HUGO

  • Page 1 PLUG-IN PERSONAL CERAMIC FAN HEATER This product is only suitable for well insulated spaces or occasional use. The front metal grill becomes very hot during use. Therefore avoid contact of unprotected skin with the hot surface. OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations.
  • Page 2 GENERAL SAFETY INFORMATION  Use this fan heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people.  Ensure that the mains power complies with the voltage specified on the fan heater data plate (220-240V~50Hz).
  • Page 3  Children aged from 3 and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Page 4 WARNING: do not use the fan heater with a controller or any other external device that activates the appliance automatically, as there may be a risk of fire if the fan heater is covered or incorrectly positioned.  Do not restrict the air inlet and outlet grilles. ...
  • Page 5  Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire and may damage the appliance.  To avoid the risk of fire, do not block the grilles or tamper with them in any way while the fan heater operates.
  • Page 6  Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.  To disconnect the fan heater, push the switch to OFF and remove the plug from the socket.
  • Page 7 WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT FROM OVERHEATING. The symbol below signals the above warning: CAUTION: hot surface. The surfaces can become very hot during use of the device.  The fan heater may cause the risk of fire if, while in operation, is covered by or comes into contact with inflammable material including curtains, drapery, blankets, etc.
  • Page 8 from busy areas or where it cannot be accidentally pulled-out.  Do not operate the fan heater in close proximity to bathtubs, showers, washbasins or pools.  Do not position the fan heater below a socket outlet.  Do not operate the appliance outdoors. ...
  • Page 9 explosive, chemical-laden or wet atmosphere.  Do not place the fan heater on soft surfaces, like a bed, where openings may become blocked. Always place the fan heater on a stable, flat, level surface when operating, to avoid the chance of the fan heater overturning.
  • Page 10 DESCRIPTION OF PARTS 1. Front panel 5. Air outlet grille 2. Display and control panel 6. Button to rotate the socket 3. Power ON/OFF button 7. Air suction grille 4. Handles to securely plug and unplug the device HOW TO USE THE FAN HEATER Connect the power cord to a suitable electric socket (220-240V~/50Hz).
  • Page 11 Power button Press this button to turn the unit on and off. After turning off the fan heater, the fan continues to function for about 60 seconds for cooling. Temperature (-) and (+) buttons Set the temperature (15-32 ° C) by pressing buttons until the desired temperature is reached.
  • Page 12 Tabel 2 - Annex II - Ecodesign requirements - Requirements for product information - COMMISSION REGULATION (EU) 2015/1188 of 28 April 2015 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for local space heaters Model identifier(s): HUGO Item Symbol...
  • Page 13 INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE 2012/19/EU At the end of its working life this equipment must not be disposed of as an household waste. It must be taken to special local community waste collection centres or to a dealer providing this service. Disposing of electrical and electronic equipment separately avoids possible negative effects on the environment and human health deriving from an inappropriate disposal and enables its components to be recovered and recycled to obtain significant savings in energy and resources.