Table of Contents
Advertisement
EN
ELECTRIC CONVECTOR
OPERATING INSTRUCTIONS
Read the instructions carefully before installing and operating the appliance or performing
maintenance operations. Observe all the safety instructions; failure to observe the instructions may
cause accidents and/or damages. Store these instructions for future reference.
V 05/16
11
Advertisement
Table of Contents
Related Manuals for Argo soul digit
Summary of Contents for Argo soul digit
- Page 1 ELECTRIC CONVECTOR OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations. Observe all the safety instructions; failure to observe the instructions may cause accidents and/or damages. Store these instructions for future reference. V 05/16...
-
Page 2: General Safety Information
GENERAL SAFETY INFORMATION Use this convector only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people. Ensure that the mains power complies with the voltage specified on the convector data plate (220-240V~/50Hz). - Page 3 Ensure that all objects are at least 1 meter from the front and sides of the appliance. Disconnect the mains power when the appliance is not used or for cleaning operations. Avoid using the convector in dusty environments or in the presence of inflammable vapours (e.g.
- Page 4 WARNING: AVOID COVERING THE CONVECTOR TO PREVENT IT FROM OVERHEATING. The symbol below signals the above warning: The convector may cause the risk of fire if, while in operation, is covered by or comes into contact with inflammable material including curtains, drapery, blankets, etc.
-
Page 5: Description Of Parts
switch off the appliance immediately, do not attempt to repair it and take it to your local after sales service. DESCRIPTION OF PARTS FRONT VIEW REAR VIEW A. Air delivery/air intake grille D. Buttons and LCD display B. Feet Rear holes for wall mounting C. - Page 6 B. Wall-mounting: how to mount the convector onto the wall. The convector packaging contains all the accessories necessary for wall-mounting. To wall-mount, proceed as follows. 1. Observe the minimum distances from the walls as 2. Mark on the wall with a pencil the points where it is pointed out in the picture below.
- Page 7 6. Insert the rear holes for wall mounting of the convector into the hooks on the wall, then fix the spacers at the base of the convector. V 05/16...
- Page 8 HOW TO USE THE CONVECTOR Position the unit on a flat, stable surface. Connect the power cord to a suitable electric socket (220-240V~/50Hz). When you move the appliance, use the handles. LCD DISPLAY FORCED TIMER display VENTILATION display TEMPERATURE Display on if the display room temperature is...
-
Page 9: Remote Control
WARNING: ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE. WHEN YOU TURN THE APPLIANCE ON AGAIN, AFTER SWITCHING IT OFF YOU HAVE TO RESET ALL FUNCTIONS AGAIN. REMOTE CONTROL ON/OFF button buttons TEMPERATURE button TIMER button ECO/COMFORT/SUPER FORCED mode selection button VENTILATION button The remote control uses Lithium/Manganese button cells, model no. -
Page 10: Maintenance And Storage
MAINTENANCE AND STORAGE ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE. IMPORTANT: DO NOT SUBMERGE THE CONVECTOR IN WATER. Cleaning the outside surface of the appliance Turn the switch off and unplug before carrying out any maintenance work or moving the appliance. Use a soft cloth to remove any dust from the convector.
Need help?
Do you have a question about the soul digit and is the answer not in the manual?
Questions and answers