Advertisement
Quick Links
EN
DIGITAL CERAMIC FAN HEATER
This product is only suitable for correctly-insulated
environments or for occasional use.
OPERATING INSTRUCTIONS
Read the instructions carefully before operating the appliance or carrying out maintenance
operations.
Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or
damage. Keep these instructions in a safe place for future reference.
GENERAL SAFETY INFORMATION
V 09/20
11
Advertisement
Related Manuals for Argo SYMPHONY
Summary of Contents for Argo SYMPHONY
- Page 1 DIGITAL CERAMIC FAN HEATER This product is only suitable for correctly-insulated environments or for occasional use. OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage.
- Page 2 Use this fan heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons. Make sure that the type of mains power complies with the electrical requirements of the fan heater (220-240 V~/50 Hz).
- Page 3 Keep flammable materials, such as furniture, cushions, blankets, paper, cloths, curtains and similar items at least 1 m away from the front, sides and back of the appliance. Disconnect the mains power when the appliance is not in use or during cleaning.
- Page 4 Do not immerse the power cable, plug or any other part of the appliance in water or other liquids. Do not touch the plug with wet hands. Do not place the fan heater above or near another heat source. WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT FROM OVERHEATING.
-
Page 5: Description Of Parts
stable surface when it is running, so as to prevent it from toppling over. Arrange the cable so that neither the fan heater or other objects can be on top of it. Always unplug the appliance when it is not in use. ... - Page 6 Use Lithium/Manganese button cells, model no. CR2032 -3 V, conforming to Battery Directive no. 2006/66/EC and amendment Directive 2013/56/EC (supplied with the remote control). HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram below) Open the battery cover at the back of the remote control (press the back and pull the flap). Insert the battery into the slot, making sure you respect the polarities.
-
Page 7: Maintenance And Storage
HOW TO USE THE FAN HEATER Place the fan heater in a vertical position on a flat and stable surface. Connect the power cable to a suitable electric socket (220-240V~/50Hz). Use the handle to move the appliance. SWITCHING ON/OFF Put the on/off button (on the rear) in the “I” position. When the appliance emits a “beep”, this means that the fan heater is ready for use and enters stand-by mode. - Page 8 Table 2 - Annex II - Ecodesign requirements - Requirements for product information - COMMISSION REGULATION (EU) 2015/1188 of 28 April 2015 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for local space heaters Model identifier(s): SYMPHONY Item Symbol...
- Page 9 INFORMATION ON THE CORRECT DISPOSAL OF THE PRODUCT pursuant to Art. 26 of (Italian) Legislative Decree no. 49 of 14/03/14, “IMPLEMENTATION OF DIRECTIVE 2012/19/EU ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT” At the end of its useful life, this appliance must not be disposed of together with household waste. We call your attention to the crucial role played by the consumer in the reuse, recycling and other forms of recovery of such waste.
Need help?
Do you have a question about the SYMPHONY and is the answer not in the manual?
Questions and answers