Upgrading The Firmware Using A Computer (Windows/Macos) - Toyota 2.0 Series Owner's Manual

Upgrading the firmware using a computer (Windows/macOS)

Keep your Series 2.0 dashcam updated by upgrading the firmware to the latest version. Check for any new firmware
releases for your Series 2.0 dashcam model by visiting this link.
1
Insert the microSD card into the microSD card reader.
2
Connect the microSD card reader to a computer.
3
Launch Series 2.0 SD Card Viewer.
4
Select SD Card Viewer and click on the About
y For Mac users, select SD Card Viewer on the top menu bar and About Series 2.0 from the menu.
5
Check the current firmware version of your Series 2.0 dashcam and proceed only if your version is not the latest one.
6
Format the microSD card. See "Formatting the microSD card" on page 39.
44
Toyota
button.
Windows macOS