Drum Cartridge Replacement - Sharp AL-1451 Operation Manual

TD CARTRIDGE REPLACEMENT
Install a new TD cartridge. To install the new cartridge, see page 12, INSTALLING
3
THE TD CARTRIDGE.
Close the front cover and then the side cover by pressing the round projections near
4
the side cover open button. The
will light up.

DRUM CARTRIDGE REPLACEMENT

The useful life of the drum cartridge is approximately 18,000 copies. When the internal counter
reaches approximately 17,000 copies, the drum replacement required (
up indicating that replacement of the drum cartridge will be needed soon. For more information
on purchasing the drum cartridge, see SUPPLY PART NUMBERS AND STORAGE on page
43. When the indicator begins to blink, the copier will stop operating until the cartridge is
replaced. Replace the drum cartridge at this time.
5
Open the side cover while pressing the side cover open button.
1
Then, push gently on both sides of the front cover to open the cover.
Gently pull the TD cartridge out while pressing the lock release button. To remove the
2
TD cartridge, see page 27, step 2.
Hold the handle of the drum cartridge and gently pull the cartridge out. Dispose of the
3
old drum cartridge in accordance with local regulations.
28
When closing the covers, be sure to close the front cover securely and then
close the side cover. If the covers are closed in the wrong order, the covers
may be damaged.
Do not remove the protective cover on the drum portion (black paper) of a new
drum cartridge before use. The cover protects the drum against external light.
indicator will go out and the ready ( ) indicator
) indicator will light