Main Features - Sharp AL-1451 Operation Manual

CAUTIONS
1
SAFETY PRECAUTIONS
This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of
the CDRH standards. This means that the copier does not produce hazardous laser
radiation. For your safety, observe the precautions below.
G
Do not remove the cabinet, operation panel or any other covers.
G
The copier's exterior covers contain several safety interlock switches. Do not bypass
any safety interlock by inserting wedges or other items into switch slots.

MAIN FEATURES

High-speed laser copying
G
Since warm-up time is zero, copying can be started immediately after the power switch
is turned on.
G
First-copy time is only 9.6 seconds (normal mode).
G
Copying speed is 14 copies/min., which adapts to business use, allowing improvement
of working efficiency.
High-quality digital image
G
High-quality image copying at 600 dpi can be performed.
G
In addition to the automatic exposure mode, the manual exposure can be adjusted in
five steps.
G
The photo mode copying function allows clear copying of delicate halftone original images
such as monochrome photos and color photos.
4
G
Place the copier on a firm, level surface.
G
Do not install the copier in a humid or dusty location.
G
When the copier is not used for long time, for example for consecutive holidays,
turn the power switch off and remove the power cord from the outlet.
G
When moving the copier, be sure to turn the power switch off and remove the
power cord from the outlet.
G Do not cover the copier with a dust cover, cloth or plastic film while the power
is on. Doing so may prevent heat radiation, damaging the copier.
G
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.