Accessing The Ultralite-Mk3 Settings - MOTU UltraLite- mk3 User Manual

MOTU Audio Setup
CHAPTER 5
OVERVIEW
MOTU Audio Setup gives you access to basic
UltraLite-mk3 hardware settings, such as sample
rate, clock source and more.
Accessing the UltraLite-mk3 settings . . . . . . . . . . . . . . . . 29
'UltraLite-mk3' tab Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Sample Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Clock Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Default Stereo Input/Output. . . . . . . . . . . . . . . . . . . . . . . . . 31
Phones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Main Out Assign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Return Assign. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
'General' tab settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Launch MOTU Audio Setup when hardware becomes
available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Edit Channel Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Enable Pedal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

ACCESSING THE ULTRALITE-MK3 SETTINGS

There are several ways to access MOTU Audio
Setup settings:
Click the MOTU Audio Setup icon in the dock
■
Press on the MOTU Audio Setup dock icon to
■
open the menu shown below, or control-click it to
open the menu immediately
From within AudioDesk™ or Digital
■
Performer™, choose Setup menu>Configure Audio
System>Configure Hardware Driver. (Note: this
dialog only provides access to basic settings such as
sample rate and clock source. For access to all
settings, use one of the techniques above.)
In Cubase or Nuendo, open the Device Setup
■
window, click VST Audio System and choose
MOTU Audio ASIO from the Master ASIO Driver
menu. Then click the MOTU Audio ASIO item in
the list and click the Control Panel button.
From the front panel LCD (see chapter 6,
■
"UltraLite-mk3 Front Panel Operation" (page 35)).
UltraLite-mk3 tab settings
The UltraLite-mk3 tab provides settings that apply
to a specific UltraLite-mk3 interface. If you have
several UltraLites (or other MOTU FireWire audio
interfaces) connected, you'll see a separate tab for
each one.
General tab settings
The General tab provides settings that apply
globally to all connected MOTU FireWire
interfaces.
29