Table of Contents
Advertisement
•
At the end of preparation, "WANT TO CONTINUE MIXING?" is
displayed. Press "YES" until you obtain a satisfactory froth,
then press "
mum of about a minute. On the other hand, if the froth is
satisfactory at the end of preparation, press "NO".
16. CUSTOMISING THE BEVERAGES
The aroma (when required) and quantity of the beverages (apart
from cold coffee and cold milk) can be customised.
1. Make sure the profile for which you want to customise the
beverage is active. You can select "MY" beverages for each
of the 6 profiles;
2. From the homepage, press "
3. To access the customising screen, choose the beverage you
want to customise. The corresponding accessories must be
inserted;
4. (Beverages with coffee only) "CHOOSE COFFEE AROMA":
Select the required aroma by pressing
press "
";
5. "CUSTOMISING COFFEE (OR WATER) QUANTITY, STOP TO
SAVE": Preparation begins and the appliance displays the
quantity customising screen in the form of a vertical bar.
The star alongside the bar represents the current quantity.
6. When the amount reaches the minimum quantity you can
set, "
" is displayed.
7. When the required quantity in the cup is reached, press "
".
8. "SAVE NEW SETTINGS?": Press "YES" or "NO".
The appliance confirms if the values have been saved or not (de-
pending on the previous selection). Press "
The appliance goes back to the homepage.
Please note!
•
Cappuccino and milk-based coffees: the coffee aroma
is saved first, followed by the quantity of first milk, then
coffee;
•
Americano: the coffee aroma is saved first, followed by the
quantity of first coffee, then hot water;
•
Hot water: the appliance delivers hot water. Press
"
" to save the required quantity.
•
You can also customise the beverages by connecting with
the DeLonghi Coffee Link App.
•
Press "
" to exit programming. The values will not
be saved.
Beverage quantity table
Beverage
Standard
quantity
ESPRESSO
40 ml
LONG
160 ml
". You can mix twice for a maxi-
" (B1);
or
".
Programmable
quantity
20-80 ml
115-250 ml
COFFEE
DOPPIO+
AMERICANO
TEA
HOT WATER
17. MEMORISING YOUR PERSONAL PROFILE
The appliance allows you to memorise 6 different profiles, each
associated with a different icon.
The customised "MY" beverages "AROMA" and "QUANTITY" val-
ues are saved in each profile (see section "16. Customising the
beverages
"). The order in which all the beverages are se-
lected is based on the frequency of selection.
To select or enter a profile, press on the profile currently in use
(B11), press
(B10) or
displayed, then press on the profile.
and
Please note!
•
"
GUEST" profile: select this profile to deliver beverages
with the default settings. The
•
You can rename your personal profile by connecting with
the DeLonghi Coffee Link App.
To customise the profile icon, proceed as follows:
1. Select the profile (B11);
2. Select "Customise";
3. Press
(B10) or
on the display (B), then select;
4. Confirm the selection with "
back to the homepage.
18. CLEANING
18.1 Cleaning the machine
The following parts of the machine must be cleaned regularly:
-
the appliance's internal circuit;
-
coffee grounds container (A10);
-
drip tray (A14);
-
water tank (A16);
-
coffee spouts (A8);
-
pre-ground coffee funnel (A4);
-
infuser (A19), accessible after opening the infuser door
(A18);
-
milk container (D);
-
"Mix carafe" (E);
-
hot water/steam connection nozzle (A9);
-
touch screen (B).
176
180 ml
100-240 ml
120 ml
80-180 ml
150 ml
70-480 ml
150 ml
30-420 ml
250 ml
20-420 ml
(B8) until the required profile is
function is not active.
(B8) until the required icon appears
. The appliance goes
Advertisement
Table of Contents
Troubleshooting
