Coffee Carafe; Delivering Hot Water; Customising The Beverages - DeLonghi DINAMICA PLUS ECAM370.95.T Instructions For Use Manual

• If you do not clean the milk container, the
pears on the display to remind you that it needs cleaning.
• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up.

9. COFFEE CARAFE

1. Position a carafe under the coffee spouts (A9). When
choosing the carafe to use, bear in mind the quantity to
be delivered, namely:
Selected quantity
2. Press "COFFEE POT", "SELECT AROMA" "AND NUMBER OF
CUPS";
3. Press .
4. After a few seconds, preparation begins automatically and
an image of the selected beverage appears on the display,
together with a progress bar which gradually fills as prepa-
ration progresses.
Once the coffee has been delivered, the machine will be ready
for further use.
Please note:
• : press to interrupt preparation completely
and go back to the homepage.
SAFETY WARNING:
After making the pot of coffee, leave the ap-
pliance to cool for 5 minutes before making
another beverage. Risk of overheating!
10.

DELIVERING HOT WATER

1. Make sure the hot water spout (D6) is attached correctly to
the hot water connection nozzle(A8);
2. Place a container under the spout (as close as possible to
avoid splashes);
3. Press "HOT WATER";The corresponding image appears on
the display, together with a progress bar which fills gradu-
ally as preparation proceeds;
4. The machine delivers hot water, then delivery stops auto-
matically. To interrupt hot water delivery manually, press
.
symbol ap-
Quantity (ml)
250
500
750
37
Please note!
• If "Energy Saving" mode is active, you may have to wait a few
seconds before the hot water is delivered.
• Preparation of hot water can be customised (see sections
"11. Customising the beverages" and "12. Memorising
your own user profile").
11.

CUSTOMISING THE BEVERAGES

The aroma (when required) and quantity of the beverages can
be customised.
1. Make sure the user profile for which you want to customise
the beverage is active. You can select "MY" beverages for
each of the profiles;
2. Press (C5);
3. To access the customising screen, choose the beverage you
want to customise. The corresponding accessories must be
inserted;
4. (Beverages including coffee only) "CHOOSE COFFEE
AROMA": Select the required aroma by pressing "-" or "+"
and press "
5. "COFFEE QUANTITY" "STOP TO SAVE": Preparation begins
and the appliance displays the quantity customising screen
in the form of a vertical bar. The star alongside the bar rep-
resents the current quantity;
6. When the amount reaches the minimum quantity you can
set, is displayed;
7. Press when the required quantity in the cup
is reached;
8. "SAVE NEW SETTINGS?": Press
to cancel).
The appliance confirms if the values have been saved or not (de-
pending on the previous selection). Press
The appliance goes back to the homepage.
Please note!
• Cappuccinos and milk-based coffees: the coffee aroma
is saved first, followed by the quantity of first milk, then
coffee;
• Hot water: the appliance delivers hot water. Press
to save the required quantity.
• You can also customise the beverages by connecting with
the DeLonghi Coffee Link App.
• Press to exit programming. The values will
not be saved.
Beverage quantity table
Beverage Standard
quantity
";
to save (or
.
Programmable
quantity