Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Slide the power-adapter port into the slot on the palm-rest assembly.
2. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest assembly.
3. Route the power-adapter port cable along its routing guides on the palm-rest assembly.
Post-requisites
1. Replace the
system
board.
2. Replace the fan.
3. Replace the
heat
sink.
4. Replace the
wireless
card.
5. Replace the
memory
modules.
6. Replace the
coin-cell
battery.
7. Follow the procedure from step 2 to step 8 in
8. Replace the keyboard.
9. Follow the procedure from step 4 to step 5 in
10. Replace the battery.
60
Replacing the power-adapter port
Replacing the power-adapter port
computer. After working inside your computer, follow the instructions in
"Replacing the base
"Replacing the optical
cover".
drive".
38
After
www.dell.com/
Advertisement
Table of Contents
