NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Slide the keyboard cable into the system-board connector and close the latch to secure the cable.
2. Turn the keyboard over, slide the tabs on the keyboard into the slots on the palm-rest assembly, and snap the keyboard into
place.
Post-requisites
Replace the battery.
Replacing the keyboard
computer. After working inside your computer, follow the instructions in
After
www.dell.com/
Replacing the keyboard
8
19