NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
NOTE:
These instructions are applicable only for laptops with a non-touch screen display.
1. Remove the battery.
2. Follow the procedure from step 1 to step 3 in
3. Remove the keyboard.
4. Follow the procedure from step 1 to step 7 in
5. Remove the
wireless
card.
6. Remove the
display
assembly.
7. Remove the
display
bezel.
Procedure
1. Remove the four screws (M2x3) that secure the display panel to the display back-cover and antenna assembly.
2. Lift the display panel and turn it over.
Removing the display panel
computer. After working inside your computer, follow the instructions in
"Removing the optical
"Removing the base
cover".
drive".
Removing the display panel
43
After
www.dell.com/
67