NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Using the alignment post, adhere the camera on the display back-cover and antenna assembly.
2. Connect the camera cable to the camera.
Post-requisites
1. Replace the
display
bezel.
2. Replace the
display
assembly.
3. Replace the
wireless
card.
4. Follow the procedure from step 2 to step 8 in
5. Replace the keyboard.
6. Follow the procedure from step 4 to step 5 in
7. Replace the battery.
72
Replacing the camera
Replacing the camera
computer. After working inside your computer, follow the instructions in
"Replacing the base
cover".
"Replacing the optical
drive".
46
After
www.dell.com/