Jonsered FR2312M Workshop Manual page 6

Transmission
Make
Oil, grade SF-CC
Number of forward gears
Number of reverse gears
Forward speed, km/h
Reverse speed, km/h
Cutting unit
Type
Cutting heights, 5 positions, mm/inch
Blade length, mm/inch
Note. 1: The power rating of the engine is the average net output (at the specified rpm) of a typical production engine of the
model, measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. The actual power
of the engine mounted in the final
product depends on operating speed, surroundings and other factors.
Note. 2: Emission of noise to the surroundings measured as sound power (LWA) in accordance with the EU directive
2000/14/EC.
Note. 3: Sound pressure level according to EN 836. Reported data for the noise pressure level has a typical dispersion
(standard deviation) of 1.2 dB(A).
Note. 4: Vibration level according to EN 836. Reported data for the vibration level has a typical dispersion (standard
deviation) of 0.2 m/s (steering wheel) and 0.8 m/s
2
Tightening torques
Steering cable pulley
Blade belt pulley
Blade
Belt tensioner
Engine mounting screws
Gearbox mounting screws
Engine belt pulley
Play
Clutch wire:
Brake lever to stop:
Brake lever:
Brake cable:
Hydrostat pedal wire:
6 – English
Tuff Torq T36P
SAE 20W/50
-
-
0-8
0-8
Z 85
25-70 / 1-2 3/4
430/17
(seat).
2
57-61 ft/lb (28-32 Nm)
57-61 ft/lb (45-50 Nm)
57-61 ft/lb (45-50 Nm)
57-61 ft/lb (15-25 Nm)
57-61 ft/lb (20-25 Nm)
57-61 ft/lb (20-25 Nm)
52 ft/lb (70 Nm)
4 - 6 mm
0 - 1 mm
7 - 9 mm
1 mm
0 mm
21-24 lbft
32-36 lbft
32-36 lbf
10-18 lbft
14-18 lbft (M8 8.8 = 24Nm)
14-18 lbft (M8 8.8 = 24Nm)
50 lbft
(0.16" - 0.23")
(0 - 0.040")
(1/4" - 3/8")
(0.040")
Technical data