Replacing Brake Cable; Removing The Brake Cable; Fitting The Brake Cable - Jonsered FR2312M Workshop Manual

6.17 Replacing brake cable

6.17.1 Removing the brake cable

1 Unhook the spring in the front part of the brake
cable.
2 Loosen the rear part and remove the brake cable
from the product.

6.17.2 Fitting the brake cable

1 Pull through the new brake cable on the product.
2 Fit the rear of the cable.
3 Fit the front part of the cable by hooking on the
spring.
Repair instructions
English – 35