Steering Wheel; Checking The Engine's Oil Level - Jonsered FR2312M Workshop Manual

4.4 Steering Wheel

1 Fit the steering wheel with steering column tube
onto the steering column. Ensure the holes are
aligned.
2 Fix the steering wheel by punching the pin in with
a hammer.

4.5 Checking the engine's oil level

Check the engine oil level when the product is
standing on a flat surface with the engine turned off.
Raise the engine cover.
Loosen the dipstick, pull it up and wipe it off.
The dipstick should be completely screwed down.
Pull up the dipstick and check the engine oil.
The oil level should be between the markings on the
dipstick. If the level is approaching the ADD mark,
top up the oil to the FULL mark on the dipstick.
ADD
ADD
FULL
Fill oil into the same hole as the dipstick.
Fill slowly with oil. Tighten the dipstick properly
before starting the engine. Start and run the engine
at idling speed for around 30 seconds. Turn off the
engine. Wait 30 seconds and then check the oil
level. If necessary fill so that the oil comes up to the
FULL mark on the dipstick.
First and foremost use synthetic engine oil class
SJ-CF 5W/30 or 10W/30 for all temperature ranges.
Mineral oil SAE30, class SF–CC can be used at
temperatures > +5 °C (40 °F)
Do not mix different oil types.
Delivery measures
FULL
English – 11