Renogy REGO User Manual
  1. Manuals
  2. Brands
  3. Renogy Manuals
  4. Battery Charger
  5. REGO
  6. User manual

Renogy REGO User Manual

Inverter charger
Hide thumbs Also See for REGO:
Table of Contents

Advertisement

Quick Links

Download this manual
REGO
Inverter Charger
12V
3000W
VERSION A0
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the REGO and is the answer not in the manual?

Questions and answers

Related Manuals for Renogy REGO

Summary of Contents for Renogy REGO

  • Page 1 REGO Inverter Charger 3000W VERSION A0 USER MANUAL...
  • Page 2 The illustrations in the user manual are for demonstration purposes only. Details may appear Renogy reserves the right to change the information in the user manual without notice. For the latest user manual, visit renogy.com.

  • Page 3: Table Of Contents

    Table of Contents Important Safety Information .......................06 .........................06 General Safety Information .....................06 Introduction ..........................08 General Information ........................08 Key Features ...........................08 ........................10 Optional Accessories ........................11 Product Overview ........................12 External View ..........................12 Internal View ..........................13 Wiring Diagram ..........................14 .......................15 Components & Tools ........................16 Inspection ............................19 Inspecting Inverter Charger .....................19 Environment ..........................19...
  • Page 4 ..........................30 Device-side Wiring ........................30 ........................32 AC Output Wiring.........................38 Device-side Wiring ........................38 Load Wiring ..........................39 Recommended Ground-Fault Circuit Interrupter (GFCI) ............41 AC Input Wiring ...........................42 Automatic Generator Start ......................44 Communication..........................48 Inter-Device Communication ....................48 Monitoring Device Communication ..................53 ........................58 Power on .............................59 Main Switch ..........................59 Wired Remote Control ......................60 Operation .............................61...
  • Page 5 Overcurrent Protection ........................81 LED Indicators ..........................82 Indicator of the Inverter Charger ....................82 Indicator of the Wired Remote Control ..................82 Program Codes ...........................83 Warning/Fault Codes ........................92 ......................94 Dimensions ..........................96 Maintenance ..........................97 Inspection ..........................97 Cleaning ..........................97 Storage ............................97 Emergency Responses .......................98 Fire ............................98 Flooding ..........................98 Smell ............................98 Noise ............................98...

  • Page 6: Important Safety Information

    General Safety Information Important Safety Information The user manual provides important installation, operation, and maintenance instructions for REGO 12V 3000W Inverter Charger (hereinafter referred to as inverter charger). Read the user Symbols Used Indicates a potentially dangerous condition which could result in WARNING injury or death.
  • Page 7 Important Safety Information Symbols Used General Safety Information they may retain high lethal voltages even after power is removed. Do not dispose of the inverter charger as household waste. Comply with local, state, and CAUTION near the inverter charger.

  • Page 8: Introduction

    Introduction General Information Key Features Introduction General Information power. shorten the installation time. have the same system monitoring wherever you go on your smartphone. With advanced pure sine wave technology, the inverter charger can protect and extend the life of your electronic Key Features Robust and sleek design Intuitive LCD and LED...
  • Page 9 Introduction General Information Key Features loss. Multiple electronic protections protection, overtemperature protection, and short circuit protection.
  • Page 10 Package Contents Package Contents REGO 12V 3000W Inverter Charger REGO Inverter Charger 3000W VERSION A0 QUICK GUIDE Wired Remote Control x 1 RMS-P2...

  • Page 11: Optional Accessories

    Optional Accessories Optional Accessories NOTE renogy.com. from overcurrent.

  • Page 12: Product Overview

    Product Overview External View Internal View Product Overview External View Part Part Main Power Switch Chassis Ground Lug Top Plate Mounting Holes...

  • Page 13: Internal View

    Product Overview External View Internal View Internal View Part Part Wired Remote Port (REMOTE)

  • Page 14: Wiring Diagram

    AC Loads Shore Power or Generator Live wire (AC) AC Load Center (120V Single Phase, 30A Max.) (120V Single Phase, 40A Max.) Neutral wire (AC) Positive (DC) Negative (DC) Ground Temperature sensor Remote control DC Fuse (400A) RMS-P2 Wired Remote Control Battery System (12V) Chassis Ground Lug NOTE...
  • Page 15 Recommended Cable Sizing Recommended Cable Sizing Cable Recommended Cable Size 0 ft to 10 ft (0 m to 3 m) 8 AWG AC Output 11 ft to 20 ft (3 m to 6 m) 6 AWG 21 ft to 30 ft (6 m to 9 m) 6 AWG 0 ft to 10 ft (0 m to 3 m) 8 AWG...

  • Page 16: Components & Tools

    Components & Tools Components & Tools CAUTION renogy. Recommended Components (Anderson 350 Connector to...
  • Page 17 Components & Tools Required Tools Wrench (10 mm) Wrench (14 mm) Measuring Tape Insulation Tape Phillips Screwdriver Slotted Screwdriver Wire stripper (6 mm) (6 mm) (12 mm) Grounding (6 AWG to 8 AWG) AC Output x 3...
  • Page 18 Components & Tools NOTE Read according to actual use.

  • Page 19: Inspection

    Inspection Inspecting Inverter Charger Environment Placement Checking Battery Inspection Inspecting Inverter Charger and corrosion. WARNING Environment °F to 104°F or -20°C to 40°C NOTE WARNING...

  • Page 20: Placement

    Inspection Inspecting Inverter Charger Environment Placement Checking Battery Placement Allow at least 10 inches of clearance at the fan and at least...
  • Page 21 Inspection Placement Checking Battery Inspecting Inverter Charger Environment 2. Measure the length of the to the inverter charger. NOTE 3. After the installation site main switch of the inverter charger to the "OFF" the inverter charger is Checking Battery corrosion. INFO...
  • Page 22 Inspection Inspecting Inverter Charger Environment Placement Checking Battery NOTE Calcium/De-sulphation/Li. CAUTION Comply with local, state, and federal laws and regulations and use recycling channels as WARNING ventilation. Battery or Battery Bank System Voltage parallel or in series as needed. This inverter charger supports 12V Batteries in Series Batteries in Parallel...

  • Page 23: Preparation

    Preparation Mounting Removing the Plate Cautions Preparation Mounting Recommended Accessories Self-tapping Screws (M8 or M6) NOTE Choose proper self-tapping screws to adapt to the installation site. Align the inverter charger with the mounting position to through the mounting holes. Removing the Plate 1.

  • Page 24: Cautions

    Preparation Mounting Removing the Plate Cautions 2. Turn the two screws on the lower panel or a Phillips screwdriver, Plate. Cautions NOTE installation code and regulations. Ensure that all ring terminals are securely connected. WARNING polarity contact will damage the inverter charger and void the warranty. Do not connect the AC Load Output to an AC Power Source such as generator or shore power.
  • Page 25 Close Open Chassis Ground Lug. NOTE of the wiring hole. NOTE...
  • Page 26 4. Connect the other end Chassis Ground Lug of the INFO When connecting the inverter charger to the chassis ground lug of your RV, consult the installed if needed.

  • Page 27: Remote Control Wiring

    You may choose to use the wired remote control of the inverter charger. 1. Run one end of the through the Remote & 2. Connect the connector to the Wired Remote Port (REMOTE). 3. Connect the connector on the other end of the RJ11 AC/INV FAULT Control.

  • Page 28: Temperature Sensor Wiring

    °F to 140°F or -20°C to 60°C. NOTE the temperature sensor through the Remote & Close Open the temperature sensor into the harness connector and tighten it with a slotted wire harness connector NOTE...
  • Page 29 charger.
  • Page 30 1. Remove the retaining nut of the DC Negative 2. Remove the retaining nut 3. Insert the positive ring REGO Battery Kit Entry, and the negative ring terminal through Normal Battery Kit NOTE...
  • Page 31 4. Connect the negative ring terminal to the DC Negative retaining nut, and tighten NOTE to prevent damage.
  • Page 32 retaining nut, and tighten NOTE to prevent damage. NOTE polarity contact may damage the inverter charger. Ensure that the Anderson connectors are fully seated and/or the ring terminals are securely connected. WARNING the same time. other.
  • Page 33 Battery Scenario A: REGO Battery Kit INFO connection. NOTE connector, install a 400A NH fuse in the top disconnection switch. NOTE 1. Connect the negative ring terminal to the negative Tighten the wire retaining AC/INV FAULT DC Negative Battery Terminal...
  • Page 34 2. For your safety, it is recommended to use a DC fuse (400A). Connect AC/INV FAULT the positive ring terminal to the DC fuse. Install the DC Positive Battery Terminal end of the fuse. 3. Attach the other ring terminal of the other poisitive terminal of the a wrench.
  • Page 35 1. Connect the Anderson separately). 2. Connect the positive and negative ring terminals the Positive and Negative respectively. 3. Attach the negative ring terminal to the Negative AC/INV FAULT wrench. DC Negative Battery Terminal 4. For your safety, it is recommended to use a DC fuse (400A).
  • Page 36 5. Attach the ring terminal of tighten the wire retaining AC/INV FAULT DC Positive Battery Terminal Battery Scenario B: Normal Battery Kit NOTE Ensure that the ring terminals are securely connected. 1. Connect the negative ring terminal to the negative terminal of a Normal AC/INV FAULT...
  • Page 37 2. For your safety, it is recommended to use a DC fuse (400A). Connect AC/INV FAULT the positive ring terminal of the inverter charger DC Positive Battery Terminal fuse. Install the fuse wire on the other end of the fuse. 3.

  • Page 38: Ac Output Wiring

    2. Push up the switches of the wire harness retainer of the AC Output Lever 3. Connect the live wire to the (L) terminal, the neutral wire to the (N) terminal, and the ground wire to the ) terminal. NOTE...

  • Page 39: Load Wiring

    4. Press down the wire harness retainer of the AC Output NOTE Recommended Accessories AC Load Center NOTE electrical systems perform the installation. INFO 1. Remove the front cover of the AC load center and connect...
  • Page 40 2. Connect the AC Output charger to the AC load center. Connect the live wire to the (L) terminal, the neutral wire to the (N) terminal, and the ground 3. Select an appropriate to the operating load current, and connect the load to the AC load center.

  • Page 41: Recommended Ground-Fault Circuit Interrupter (Gfci)

    A ground-fault circuit interrupter, or GFCI, is a device that help protect people from electric in wet or damp locations. you can manually test the circuit. are connected to the AC Outlets of the inverter. Tested GFCI Models Manufacturer Model Number Leviton GFNT2 GFP1305...

  • Page 42: Ac Input Wiring

    The AC input is optionally installed on demand. Shore Power or Generator (120V Single Phase, 40A Max.) through the AC Input AC/INV FAULT AC Input Lever Terminal Block NOTE WARNING AC input wiring. INFO When connecting the inverter charger to an AC Input, read the user manual of the AC Input for wiring instructions.
  • Page 43 3. Connect the live wire to the (L) terminal, the neutral wire to the (N) terminal, and the ground wire to the ) terminal. NOTE 4. Press down the switch of the harness retainer of the AC NOTE...

  • Page 44: Automatic Generator Start

    Automatic Generator Start Automatic Generator Start If the inverter charger is connected to an AC Power Supply (AC Input) and the generator can automatically start or stop. It is recommended to connect the generator to the Dry Contact Relay When the voltage of the inverter charger is lower than the set voltage in Program 96, the inverter the generator.
  • Page 45 Automatic Generator Start AC Generator AC Input Positive (DC) Negative (DC) Signal Line AC/INV FAULT Dry Contact Relay Battery System (12V) Terminal Block INFO Connect three signal lines to NC (normally closed contact), NO (normally open contact), and C (common static contact) of the AC Input. For more instructions, read the user manual of AC Input.
  • Page 46 Automatic Generator Start 3. Run three signal lines through the Remote & screws of NC, C and NO of Dry Contact Close a slotted screwdriver to retainers are open. Open 5. Connect three signal lines to the corresponding NC, C, and NO wiring holes. NOTE Some generators only have NC (normally closed contact) and C (common static contact) or NO (normally open contact) and C (common static contact).
  • Page 47 Automatic Generator Start screws of NC, C and NO screwdriver to fasten the NOTE Accessory Plate. 8. Install four retaining with a Phillips screwdriver. If your inverter charger uses the DC Generator as the power supply and the DC Generator can automatically start or stop, you can connect the DC Generator to the inverter charger via the signal line.

  • Page 48: Communication

    Communication Inter-Device Communication Monitoring Device Communication Communication The communication connection is optional. The REGO Inverter Charger can communicate with WARNING power is removed. Inter-Device Communication Backbone Topology necessary. For technical support from Renogy, please contact us through renogy.com/contact-us/. CAUTION manufacturer.
  • Page 49 Communication Inter-Device Communication Monitoring Device Communication NOTE feet (30 m). example. 1. Insert the RJ45 connector Remote & Accessory 2. Connect the RJ45 connector to the Communication Port 3. The white green CAN_H wire goes to pin 2 and the white orange CAN_L wire 1 2 3 4 5 6 7 8 goes to pin 3.
  • Page 50 The drop taps are usually located NOTE If you fail to locate the drop taps, please contact the RV manufacturer for help. 6. Connect the Drop Plugs other REGO devices to drop tap. NOTE...
  • Page 51 Communication Inter-Device Communication Monitoring Device Communication Daisy Chain Topology NOTE Recommended Accessories LP16 Plug (7-Pin) to RJ45 Communication Adapter LP16 Terminator Plug (7-Pin) Ethernet Adapter Splitter NOTE 1. Insert the RJ45 connector Port Ethernet Adapter Splitter through the Remote & Accessory 2.
  • Page 52 Plug (7-Pin) to the RJ45 Communication Adapter Ethernet Adapter Splitter. 4. Connect the other ends of the LP16 Plug (7-Pin) to RJ45 Communication Adapter communication ports of other REGO devices. Insert the terminal plugs (sold separately) into the vacant CAN communication port of devices.

  • Page 53: Monitoring Device Communication

    Communication Inter-Device Communication Monitoring Device Communication Monitoring Device Communication for the monitoring and programming of the inverter charger or even the complete system. NOTE Scan the QR code on the last page of the user manual to download the DC Home app. with the DC Home app.
  • Page 54 Status Utility First Utility First BULK Charge 1000 Load Watts Load Volts Load Amps Inveter Output Hz Battery Charging Watts Battery Vots Long-Range Monitoring Wi-Fi. Recommended Accessories Renogy ONE NOTE INFO Read the user manual of Renogy ONE at renogy.com...
  • Page 55 Renogy ONE with the DC Home app through Wi-Fi. Commonly Monitor the inverter charger Security Night Devices Battery Controller on the Renogy ONE or the DC RBT12400LFPL-... RCC60RVRU Home app. Device Scene Community Personal 12V Power Supply NOTE Keep the phone within 10 feet (3 m) of the inverter charger.
  • Page 56 Communication Inter-Device Communication Monitoring Device Communication NOTE manufacturer. Refer to for more instructions. 2. Monitor and program the complete system on Renogy ONE or the DC My Renogy Home app. h left Commonly Security Night Devices Battery Controller RBT12400LFPL-... RCC60RVRU...
  • Page 57 2. Connect the Renogy ONE to the free CAN Communication Port on the REGO device with the Communication Adapter 12V Power Supply 3. Pair Renogy ONE with the DC Home app. Monitor...
  • Page 58 Putting Plates Back Inter-Device Communication Monitoring Device Communication Putting Plates Back Reinstall the plates into the inverter charger after wiring. secure. and drive the two panel plate. 3. Install the Top Plate. Drive the two panel screws...

  • Page 59: Power On

    2. The screen lights up and displays the status after the AC/INV inverter charger is powered on. The AC/INV indicator will normally when all of the following conditions are met: The fan operates with the sound The screen lights up The indicator lights up Please contact us through renogy.com/contact-us/.

  • Page 60: Wired Remote Control

    The fan operates with the sound The screen lights up The indicator lights up The ON indicator of the wired remote control lights up Please contact us through renogy.com/contact-us/.

  • Page 61: Operation

    Operation Button Setting Battery Type User Mode Operation You can view the current operation status and warning messages of the inverter charger on the LCD. Icon Function Description Input Source Information Indicates the AC input. INPUTBATT current. Indicates setting programs. Indicates the warning and fault codes.
  • Page 62 Operation Button Setting Battery Type User Mode Icon Function Description Battery Information CHARGING Status Battery voltage LCD Display < 12.0V 12.0V - 12.5V Constant Current mode / Constant 12.5V - 13.0V Voltage mode > 13.0V Load Percentage Battery Voltage LCD Display <...
  • Page 63 Operation Button Setting Battery Type User Mode Icon Function Description Load Percentage Battery Voltage LCD Display < 11.2V 11.2V - 11.7V 11.7V - 12.2V > 12.2V Load Information OVER LOAD Indicates overload. 100% Mode Operation Information Indicates the inverter charger is connected to the shore power. BYPASS...
  • Page 64 Operation Button Setting Battery Type User Mode Button AC/INV FAULT...
  • Page 65 Operation Button Setting Battery Type User Mode Setting Battery Type 1. Long press until the LCD enters setting mode. AC/INV FAULT AC/INV FAULT 2. Press to display Program 05. AC/INV FAULT 3. Press to enter 05 settings. AC/INV FAULT...
  • Page 66 Operation Button Setting Battery Type User Mode 4. Press AC/INV FAULT 5. After selection, press to save settings. AC/INV FAULT Program Description Parameter Setting Boost Voltage Float Voltage Code User Mode Gel 1 For accurate 14.0V 13.7V charging, connection to a temperature A.G.M.1 14.1V...
  • Page 67 Operation Button Setting Battery Type User Mode Program Description Parameter Setting Boost Voltage Float Voltage Code Sealed Lead Acid 14.4V 13.6V Gel 2 14.4V 13.8V Open Lead Acid / Flooded 14.8V 13.8V For accurate charging, connection to Calcium a temperature 15.1V 13.6V De-sulphation...

  • Page 68: User Mode

    Operation Button Setting Battery Type User Mode User Mode WARNING type selection damages the inverter charger and voids the warranty. 1. Long press until the LCD enters the setting mode. AC/INV FAULT AC/INV FAULT 2. Press until the LCD enters Program 05. AC/INV FAULT 3.
  • Page 69 Operation Button Setting Battery Type User Mode 4. Press to select AC/INV FAULT 5. After selection, press to save settings. and Float at 13.7V. AC/INV FAULT 6. Long press until the LCD enters the setting mode. AC/INV FAULT AC/INV FAULT 7.
  • Page 70 Operation Button Setting Battery Type User Mode 8. Press to enter 94 settings. AC/INV FAULT 9. Press to select Lithium Battery Non-lithium Battery according to AC/INV FAULT AC/INV FAULT 10. After selection, Press to save settings. AC/INV FAULT 11. Long press until the LCD enters the setting mode.
  • Page 71 Operation Button Setting Battery Type User Mode 12. Press to enter Program 26. BATT AC/INV FAULT 13. Press to enter 26 settings. BATT AC/INV FAULT Maximum Charging Voltage Bulk Charging Voltage maximum charging voltage in Program 26. BATT BATT AC/INV FAULT AC/INV FAULT...
  • Page 72 Operation Button Setting Battery Type User Mode 16. After selection, press to save settings. BATT AC/INV FAULT 17. Long press until the LCD enters the setting mode. AC/INV FAULT AC/INV FAULT 18. Press to enter Program 27. BATT AC/INV FAULT 19.
  • Page 73 Operation Button Setting Battery Type User Mode Battery Low Voltage Open Floating Charging Voltage Charging charging in Program 27. BATT BATT voltage in Program 27. AC/INV FAULT AC/INV FAULT is lower than the preset value, the inverter charger reaches the preset value of Program 26.
  • Page 74 connected to the utility AC input, the inverter charger can meet powerful needs as well as loads on the inverter’s 1. The ON indicator of the AC/INV wired remote control and the AC/INV indicator of green when the inverter charger is powering loads RMS-P2 2.
  • Page 75 CAUTION renogy. com/contact-us/. 4. Under normal conditions, AC/INV FAULT FAULT indicator of the inverter charger and the ERR indicator of the wired remote control will not light RMS-P2 AC/INV FAULT at the same time (0.5s), it means warnings are charger. For details, refer...

  • Page 76: Power Supply Logic

    Power Supply Logic Charging Logic Heat Dissipation Logic Power Supply Logic Battery Voltage AC Input Power Supply Equipment 10.5V to 16V (±0.3V) 10.5V (±0.3V) AC Input ±0.3V). If ± AC input starts to supply power to the load. CAUTION You can set the output priority in Program 01. For details, refer to Program Codes in this user manual.
  • Page 77 Power Supply Logic Charging Logic Heat Dissipation Logic Battery Charging Stages Adjustable Time Depending on Battery Bank Size Volts Charging Current % 14.5 Float 13.5v 13.5 12.5 11.5 10.5 Time Full Current Available on Float for on Board Supply in Power Pack Mode The New Battery Chargers And Boosters Offer The Fastest Charge Rate Currently Available Step 1 = Constant Current Charge Step 2 = Absorption Charge at 14.4V/14.8V...

  • Page 78: Heat Dissipation Logic

    Power Supply Logic Charging Logic Heat Dissipation Logic Heat Dissipation Logic Inverter Charger AC output current Charging Current °C, the fan Temperature When the temperature of the inverter charger < 50°C, the fan...

  • Page 79: Main Switch

    Main Switch Main Switch 1. Press the main switch of the inverter charger to 2. The LCD and the LED indicators go out when the inverter RMS-P2...
  • Page 80 Main Switch 2. The LCD and LED indicators of the inverter charger as well as the ON indicator of the wired the inverter charger is RMS-P2...

  • Page 81: Overcurrent Protection

    Overcurrent Protection Overcurrent Protection WARNING power is removed. 1. Turn the two upper panel screwdriver, and remove the Top Plate. 2. When the AC input current exceeds 40A, the automatically pop out. Press the CHARGER 3. When the AC output current exceeds 30A, the will automatically pop out.

  • Page 82: Led Indicators

    LED Indicators Indicator of the Inverter Charger LED Indicators Indicator of the Inverter Charger LED Indicator Parameter Solid AC/INV Green Flashing Solid Green Flashing Fault Solid For details, read Warning/Fault Codes in the user manual. FAULT Flashing Warning For details, read Warning/Fault Codes in the user manual.

  • Page 83: Program Codes

    Program Codes Program Codes Operation Methods (1). Long press until the LCD enters the setting mode. (2). Press to select programs. (3). Press to enter settings. (4). Press to set parameters. (5). Press to save settings. NOTE voltage, charging current, and AC input voltage. Setting Programs: Icon Description...
  • Page 84 Program Codes NOTE inverter charger to sensitive electronic devices such as computers and TVs as the narrow mode Icon Description Details Wide Input voltage range Narrow (default) appliance). Whenever an AC load (greater than 50 watts) is turned on, the inverter charger voltage.
  • Page 85 Program Codes motor or appliance. Icon Description Details the DC recharging power. Icon Description Details Maximum utility The default is the maximum value charging current (75A-3KW), with a 5A minimum. in Program 12, the inverter charger will stop supplying power to loads. Once the utility power is detected, the utility power/generator will supply power to the loads.
  • Page 86 Program Codes Icon Description Details pressed Icon Description Details Return to default display screen Auto return to The display screen will return to default (default) default display screen (Input voltage / Output voltage) screen after 1 minute of inactivity. Stay at latest Auto return to screen Display screen will stay on current screen...
  • Page 87 Program Codes When the switch is on and the inverter’s main input AC power is disconnected, the inverter will Icon Description Details primary source is interrupted The inverter charger will demonstrate the fault code. Icon Description Details Record Fault code For more instructions, read in the user manual.
  • Page 88 Program Codes For more instructions, read in the user manual. NOTE Icon Description Details Type BATT NOTE Icon Description Details The default setting is 10.0V. Setting range is from 10.0V to 12.0V with increments of 0.1V. voltage BATT Icon Description Details...
  • Page 89 Program Codes For more instructions, read in the user manual. NOTE Icon Description Details 26, 27 type Non-lithium in Program 26, 27 The inverter charger have functions to automatically start and stop a generator for supplementing charge. The auto generator feature starts the generator with the use of Normally Closed (NC) contacts of the relay that “opens”...
  • Page 90 Program Codes The inverter charger can automatically start and stop a generator for supplementing charge. The auto generator feature starts the generator with the use of Normally Closed (NC) contacts of the relay that “opens” when the battery voltage drops to the programmed value of Program 96, Low Battery Voltage Setpoint.
  • Page 91 Program Codes Icon Description Details The default is 10.5V. The setting range is 10.5V to 12.5V with than setting Program 29. alarm BATT...

  • Page 92: Warning/Fault Codes

    For more technical support, contact our custom service through renogy.com/contact-us. Icon 05: Over-temperature alarm renogy.com/ contact-us/. 4. Shut down the inverter charger and restart it when its temperature decreases. 07: Overload alarm 88: The inverter transformer is phased in reverse whether the AC input wiring is correct.
  • Page 93 06: The output voltage of inverter charger is too high or too low Shut down the inverter charger and restart it. If the fault still persists, ERROR contact our custom service through renogy.com/contact-us/. 07: Inverter charger overloaded ERROR 98: The transformer of inverter charger is overheated renogy.com/...
  • Page 94 Rated Output Power 3000W 9000W 4500W 3600W Nominal Output Voltage RMS 120V AC (100V to 120V AC, 5V intervals) ± ± Outuput Frequency Pure Sine Wave (± ± Output Overload ± Nominal Input Voltage 12V DC Input Voltage Range 11V to 16V DC (±0.3V) 11V DC (±0.3V) 10.5V DC (±0.3V) Short Circuit Protection...
  • Page 95 Short Circuit Protection ± Output Overload ± Overcharge Protection 16V for 12V DC Shutdown Transfer Time 10 ms Transfer Relay Rating Battery Types Gel, AGM, SLA, Flooded, Calcium, Li, User Mode Operating Temperature Range -4°F to 104°F or -20°C to 40°C Storage Temperature -22°F to 158°F or -30°C to 70°C Humidity...

  • Page 96: Dimensions

    Dimensions Dimensions 12.99 in [330 mm] 0.35 in [9 mm] 8.89 in [266 mm] 12.99 in [330 mm] 0.28 in [7 mm] 14.99 in [380.8 mm] 9.76 in [248 mm] 0.51 in [13 mm] 7.58 in [192.7 mm] 11.22 in [285 mm] 20.07 in [510 mm] NOTE Dimension tolerance: ±0.2 in (0.5 mm)

  • Page 97: Maintenance

    Maintenance Inspection Cleaning Storage Maintenance Inspection Ensure the inverter charger is installed in a clean, dry and ventilated area. connections. If the inverter charger is dirty, use a damp cloth to clean the outside of the device to prevent completely dry after cleaning. WARNING terminals on the inverter charger.

  • Page 98: Emergency Responses

    Emergency Responses Fire Flooding Smell Noise Emergency Responses addressing other suggestions. WARNING Fire , and WARNING Flooding Smell 2. Ensure that nothing is in contact with the inverter charger. 3. Ventilate the room. Noise NOTE...

  • Page 99: Technical Support

    Technical Support Technical Support For additional support, contact the Renogy technical support team through renogy.com/contact- Owner name Contact information Purchase channel North America www.renogy.com www.renogy.cn ca.renogy.com au.renogy.com fr.renogy.com de.renogy.com Europe es.renogy.com...
  • Page 100 FCC Statement (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. the instructions, may cause harmful interference to radio communications. However, there is no the following measures: (1) Orient or relocate the receiving antenna.
  • Page 101 "Contact Us". Renogy reserves the right to change the contents of this manual without notice. Join the Renogy Power Plus Community by downloading the DC Home App. Find your e-warranty here, and more.

Table of Contents

Save PDF