Troubleshooting; Warranty - Bissell ICONpet PRO 2746 Series Quick Start Manual

Troubleshooting

For a comprehensive walkthrough of your product and support visit support.BISSELL.com.
This guide has everything you need to get ready for first use, including setting up, using and
maintaining your machine, but online you'll find additional resources like tips and troubleshooting,
videos, product registration, parts, and more.
Problem Possible Cause
Filters are dirty.
Vacuum
won't pick There is a clog in the vacuum.
up dirt
Dirt Tank is not seated correctly.
Dirt Tank is full.
Filters are missing or dirty.
Dirt is
escaping
from the
There is a clog in the vacuum.
vacuum
Wrong charger is being used.
Vacuum
won't
Charger is not plugged into the
charge
machine properly.
Errors
Cause: Suction motor fault.
Remedy: Turn machine
OFF. Check and clean
filters. Check and clean the
machine of clogs. If this
doesn't solve the problem,
contact Consumer Care.

Warranty

3-Year limited warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691
for complete warranty information.
Cause: Brush roll stall.
Remedy: Turn machine OFF.
Check and clean the brush
roll of any clogs. Brush
roll can be removed for
thorough cleaning (page 8).
Turn machine ON.
Remedies
Remove and rinse Pre-Motor Filters. Allow
enough time for them to dry properly before
reinserting. Remove and dust off post-motor
filter.
Remove the foot and extension wand from the
hand vacuum. Check for debris buildup or clogs
in each of these sections. Clear any debris or
clogs before reassembling.
Remove the tank and reseat properly.
Empty the tank.
Check to see if the Pre-Motor & Post Motor
Filters are in place and clean, if necessary.
Remove the foot and extension wand from the
hand vacuum. Check for debris buildup or clogs
in each of these sections. Clear any debris or
clogs before reassembling.
Use only the charger that comes with the
machine.
Remove the charger and reinstall into the hand
vacuum.
Cause: Battery issue.
Remedy: Contact Consumer
Care.
Air flow issue.
Remedy: Turn machine
OFF. Check and clean
filters. Check and clean the
machine of clogs. If this
doesn't solve the problem,
contact Consumer Care.
BISSELL.com 11