Charging The Battery - Bissell ICONpet PRO 2746 Series Quick Start Manual

Charging the Battery

Go to support.BISSELL.com for additional how-to videos.
Before first use, make sure to fully charge your stick vacuum for 4 hours to get a full charge.
To charge the battery you can plug the charger directly into the Hand Vacuum Assembly or into the
Wall Storage & Charging Station.
Charging with the Hand Vacuum
1.
Plug the battery charger
into the wall.
Charging with the Wall Storage & Charging Station
1.
Follow instructions on
page 5 for installing the Wall
Storage & Charging Station.
Once installed, hang the
machine onto the station.
6 BISSELL.com
2.
Plug the charger into the
charging port on the back side
of the hand vacuum.
4
2.
Let the vacuum charge for 4
hours or until all three sections
of the battery charge icon are
illuminated.
4
3.
Let the hand vacuum charge
for 4 hours or until all three
sections of the battery charge
icon are illuminated.