Assembly; Installation Of The Start Unit To The Top Part Of The Handle; Installing The Handle - Fieldmann FZR 2011-E User Manual

EN 10

Assembly

5. ASSEMBLY
For the purpose of transportation, the lawnmower is supplied disassembled. Before use, it must be assembled
according to the following steps:

5.1 INSTALLING THE HANDLE

Fig. 2.1
Prior to installing the handle, slide the power cord holding hook on to the top part. Figure 2. 1
Connect the top and bottom part of the handle using the included screws and thumb nuts. Figure 2.2
Slide both handle ends into the holes in the body of the lawnmower. The handle can be removed again by
simply pressing the yellow button. Figure 2.3
Attach the power cord to the handle using the plastic clips.
Note: the handle can be folded for storage purposes.
Fig. 2.2
Fig. 2.3
FZR 2011-E