Table of Contents
Advertisement
IDM-Z2-264-M-2D-J2-BT-N-N0, IDM-Z2-164-M-1D-J2-BT-P-N0
System Structure
4.5
System Structure 4
Overview of the complete system structure 4: Wired 1-D or 2-D handheld scanner IDM-Z2-
x64-M-* connected via base station/charger to the power module and the USB Ex i interface
"3" (Module A or B) of the VisuNet GXP.
Z2 Bluetooth® Barcode Scanner connection to VisuNet GXP via "S3" interface
Figure 4.4
Required components:
•
VisuNet GXP system with interface "3"
•
DATL-IDM-DB-S-XX00-N0 connection cable VisuNet GXP interface
•
CBL-IDMx61-B-Jx-S-S07-N0 base station connection cable
•
Bluetooth® barcode scanner (1-D or 2-D)
•
IDM-Z2-x64-B-J2-BT-N0 base station
•
HOLDER-BRACKET-XX00-IDMx61-B-N
Description
The Bluetooth® handheld barcode scanner is designed to be used in explosion-hazardous
areas. For proper operation in explosion-hazardous areas, an IDM-Z2-x64-B-J2-BT-N0 base
station, the permissible RS-232 cordsets CBL-IDMx60-D-J1-S* and the DATL-IDM-DB-SXX00-
N0 connection cable must be used. An accessory cable DATL-IDM-DB-S-XX00-N0 is required
for a connection to the VisuNet GXP in the AG-XX00 housing via the interface "3" option. This
provides the housing feedthrough and has a connection socket that fits the scanner connection
cable. The intrinsically safe power supply and data transfer are realized via the CBL-IDMx61-B-
Jx-U-S07-N0 connection cable.
Note
The installation of the IDM-Z2-x64-B-J2-BT-N0 base station with either the IDM-Z2-164-M-1D-
J2-BT-P-N0 or IDM-Z2-264-M-2D-J2-BT-N-N0 barcode scanner to the integrated barrier of the
VisuNet GXP requires the optional interface "3". Refer to the VisuNet GXP technical data
(Module A and B) for further information regarding the interfaces.
Warning!
Zone 2/22 VisuNet GXP system installations are only suitable for use in Explosion Group IIB.
14
Advertisement
Table of Contents
