Pepperl+Fuchs IDM-Z2-264-M-2D-J2-BT-N-N0 Manual page 10

IDM-Z2-264-M-2D-J2-BT-N-N0, IDM-Z2-164-M-1D-J2-BT-P-N0
System Structure
Description:
The Bluetooth® handheld scanner has been designed with the battery for explosion-hazard-
ous areas. For proper operation in explosion-hazardous areas, a IDM-Z2-x64-B-J2-BT-N0
base station, a supply cable SK-IDM-Z2-J2-5M-S-N and CBL-IDMx60-* connection cable are
required
The Bluetooth® handheld barcode scanner is designed to be used in explosion-hazardous
areas Zone 2/22. The connection in this structure uses the supply cable SK-IDM-Z2-J2-5M-S-
N which is connected to the communication interface and realizes the data and intrinsically
safe power supply. The RS-232 interface of the host PC is located in the non-explosion-hazard-
ous area. Data communication is via the RS-232 interface, while the base station is powered by
the additional power supply. The power is transferred within the supply cable SK-IDM-Z2-J2-
5M-S-N into intrinsically safe power.
Note
This scenario can also be realized with USB protocol. With the USB-interface version, the
maximum total cable length of the supply cable SK-IDM-Z2-J2-1M-U-N is 1 meter. Use the
compatible USB cables CBL-IDMx60-D-J1-U*.
10