Related Manuals for Backyard Creations 259-5165
Summary of Contents for Backyard Creations 259-5165
- Page 1 FIRE COLUMN 259-5165 Assembly and Use Instructions VER. 1, 12/12/2018 PLEASE READ ALL RULES FOR SAFE OPERATION AND HELPFUL HINTS BEFORE USING.
-
Page 2: Carbon Monoxide Hazard
PAGE 2 FIRE COLUMN READ FIRST! RULES FOR THE FIRE COLUMN OUTDOOR FIRE PIT SAFE OPERATION. • THE FIRE COLUMN IS FOR OUTDOOR USE ONLY! • USE ONLY ON BRICK, CONCRETE, STONE OR OTHER MASONRY SURFACES! • DO NOT USE ON LAWNS, WOODEN DECKS, COMPOSITE DECKS, ASPHALT OR ANY COMBUSTIBLE SURFACE. -
Page 3: Parts List
PAGE 3 TOOLS REQUIRED A Phillips or plain screwdriver and FIRE COLUMN an adjustable wrench are needed for assembly. Assembly time: 20 minutes PARTS LIST When unpacking the Fire Column from the carton, make sure you find and become familiar with all the parts listed below. - Page 4 PAGE 4 FIRE COLUMN ASSEMBLY INSTRUCTIONS 1-8 M6 x 15MM BOLT M6 HEXNUT STEP NOTCHED ASSEMBLE BOTTOM PLATE CORNER Place (1) structured panel [ B ] on the work surface with the angled sides up. Make sure the work surface is smooth and soft so it doesn't scratch the panel.
- Page 5 PAGE 5 FIRE COLUMN ASSEMBLY INSTRUCTIONS 2-8 SLOT STEP ATTACH SLIDING PANEL Place (1) sliding panel [ C ] on the work surface with the pins up. Align the structured panel [ B ] slots with the pins on the sliding panel [ C ]. Slide panel to lock in place.
- Page 6 PAGE 6 FIRE COLUMN ASSEMBLY INSTRUCTIONS 3-8 SLOT STEP ATTACH STRUCTURED PANEL Align the slots on the structured panel [ B ] with the pins on sliding panel [ C ]. Slide DO NOT RETURN PRODUCT TO THE panel to lock in place. Make sure all pins STORE.
- Page 7 PAGE 7 FIRE COLUMN ASSEMBLY INSTRUCTIONS 4-8 M6 x 15MM BOLT M6 HEXNUT STEP ATTACH STRUCTURED PANEL Assemble the structured panel [ B ] to the bottom plate [ D ] using (2) 15MM bolts [ P ] and (2) hexnuts [ Q ]. Tighten all 4 bottom panel bolts securely.
- Page 8 PAGE 8 FIRE COLUMN ASSEMBLY INSTRUCTIONS 5-8 SLOT STEP ATTACH SLIDING PANEL Align the 8 pins on the sliding panel [ C ] with the slots on the structured panel [ B ]. With all pins engaged, slide panel down to lock in place. Make sure all pins align and attach.
- Page 9 PAGE 9 FIRE COLUMN ASSEMBLY INSTRUCTIONS 6-8 PIN NOT LOCKED IN SLOT WILL MAKE GAP Make sure all the panels are locked together. There should be no gaps in the panels. STEP ASSEMBLE THE COLUMN TOP At the top of the column, make sure the holes are lined up and all the panels are locked together.
- Page 10 PAGE 10 FIRE COLUMN ASSEMBLY INSTRUCTIONS 7-8 M6 x 15MM BOLT 18MM FLAT WASHER STEP ASSEMBLE THE BASE Carefully turn the column so the feet are upright. Carefully place the base [ A ] onto the feet and align the holes with the rivet nuts.
- Page 11 PAGE 11 FIRE COLUMN ASSEMBLY INSTRUCTIONS 8-8 12" 40" 20" STEP TURN OVER Carefully turn the column so the base is on the ground. The Fire Column is ready for use. DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE EMAIL CUSTOMER SERVICE AT:...
- Page 12 PAGE 12 FIRE COLUMN USE INSTRUCTIONS PREPARE TO USE Add easy to ignite material to the bottom of the column such as loose wads paper and/ or kindling on top. Paraffin wax firestarters work well. Carefully add up to 5 lbs. of firewood to the column.
- Page 13 PAGE 13 FIRE COLUMN USE INSTRUCTIONS DO NOT THROW FIREWOOD INTO COLUMN. DO NOT BURN FIREWOOD ON BASE. DO NOT OVERFILL THE COLUMN. DO NOT BURN FIREWOOD ON TOP OF COLUMN. USAGE TIPS: Do not throw firewood into the column. Do not overfill the column.
-
Page 14: Helpful Hints
Eau Claire, WI 54703 For questions or comments please Made in China Email customer service at: Occasionally, the Fire Column finish will need to customerservice@landmann-usa.com MODEL: 259-5165 be refinished. Use a high quality, high heat MANUFACTURER MODEL: 21109 paint to renew the finish.