Advertisement
Quick Links
IMPORTANT!! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY!!
TO EXPEDITE ANY FUTURE WARRANTY CLAIMS, PLEASE KEEP INSTRUCTION SHEET, WARRANTY CARD, AND RECEIPT.
Step 1:
Remove all protective materials and set parts on a flat, non-abrasive surface. Identify parts packed in the carton against the parts list.
If you are missing any parts or unsure how to proceed with assembly, call our Customer Service Center at 1-800-416-3511.
attempt assembly if any parts are missing or damaged.
Attach the chair frame to the left leg by using three bolts and washers as shown in the diagram. Guide the bolts through the holes
Step 2:
in the chair frame into the pre-drilled holes in the left leg.
Step 3:
After making any necessary adjustments to the alignment of the parts, use the hex bolt driver to tighten all bolts. Repeat until all
bolts are tight.
Do not over tighten
ready for use. If you have any questions, please call our Customer Service Center at 1-800-416-3511.
IMPORTANT NOTE: Damage to welds or frames resulting from over tightened bolts or improper assembly is not covered under
our warranty. Please read all instructions carefully before assembly. If you have any questions regarding your assembly, call our
Customer Service Center at 1-800-416-3511.
Hand tighten only 2-3 turns.
. Over tightening may strip bolts. Cover bolts with bolt covers provided. Your chair is now
B
D
E
D
E
C
Do not
Repeat for the right leg.
A
E
D
F
Page 2
* NOTE: PARTS SHOWN ON PARTS LIST ARE NOT TO SCALE
PARTS LIST
DESCRIPTION
A
CHAIR FRAME
B
RIGHT LEG
C
LEFT LEG
1/4" X 35 MM BOLT
D
Ø6.5 X 1.0 MM
E
WASHER
F
BOLT COVER
HEX BOLT DRIVER
G
FOOT CAP
FACTORY ASSEMBLY
S2-AGW10000K01
ORDER PART # QTY
AK1638
1
AK1639
1
1
AK1640
6
HW0142
6
HW0004
2
HW0105
HW0006
1
FC0607
Advertisement
Related Manuals for Backyard Creations 272-1982
Summary of Contents for Backyard Creations 272-1982
- Page 1 IMPORTANT!! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY!! TO EXPEDITE ANY FUTURE WARRANTY CLAIMS, PLEASE KEEP INSTRUCTION SHEET, WARRANTY CARD, AND RECEIPT. * NOTE: PARTS SHOWN ON PARTS LIST ARE NOT TO SCALE Step 1: Remove all protective materials and set parts on a flat, non-abrasive surface. Identify parts packed in the carton against the parts list. If you are missing any parts or unsure how to proceed with assembly, call our Customer Service Center at 1-800-416-3511.
- Page 2 This is critical. Water allowed to accumulate inside the frames and then exposed to sub-freezing temperatures can cause damage to SKU #272-1982 the frame tubing. Such damage is not covered under warranty. Always clean, drain and dry thoroughly before storing for the winter.