Summary of Contents for Backyard Creations UMB-933060
Page 1
10’ Solar Offset Umbrella Assembly & Care Instructions SKU #: 272-3010 Model #: UMB-933060 IMPORTANT : RETAIN FOR FUTURE REFERENCE READ CAREFULLY The schematics in this manual are for assembly and operation illustration only. They may differ from the actual appearance.
Preparation Remove all protective materials. Be careful not to throw away small parts such as bolts, washers, etc., that may be wrapped in the protective materials. Before assembling make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product.
Assembly ( ) Then screw the solar panel clockwise.
Page 5
Assembly Step 2: Place the upper cross leg (D) on the top of lower cross leg (C) Step 3: Attach the holder pole (F) to the cross legs intsert the bolts (GG) and washers (HH) . Adjust the holder pole (F) to be sure that it is positioned correctly on the base and tighten the bolts.
Page 6
Assembly (continued) Holder Pole Ring Control Knob Step 4: Insert the pole of the Umbrella Frame with Canopy (N) into the Holder Pole (F) until the lower fixed stop pin sits on the Holder Pole ring. Tighten the two control knobs to secure the main pole. WARNING: Be sure to secure and/or weight the cross leg base of the umbrella with at least 200 lbs to prevent the umbrella from tipping over with umbrella base (sold separately)
Umbrella Operation Storage straps Step 1: Unfasten the storage straps if fastened. Step 2: Unlock the extension arm clamp (K) and the vertical lift mechanism clamp (H). Extend the umbrella extension arm outwards while lifting the vertical lift mechanism upwards. Fully open the umbrella arm.
Page 8
Umbrella Operation (continued) Lock Cover (G) Step 3: When the umbrella arm is fully extended, lock the two clamps (K and H). Slide the lock cover (G) into the locking mechanism on the back side of the vertical lift mechanism. Turn ON/OFF solar lights.
Page 9
Umbrella Operation (continued) CRITICAL STEP Lock Cover (G) Step 5: Slide back the lock cover (G) away from the vertical lift mechanism before lowering the umbrella. WARNING: Failure to slide back the lock cover (G) away from the vertical lift mechanism before lowering the umbrella arm will cause non-repairable damage to the locking parts (K and H).
Warranty ONE YEAR WARRANTY This product is covered under a manufacturer’s one year warranty from date of purchase against defects in materials and workmanship. This warranty does not cover damage due to neglect, abuse or weather related damage. For full warranty disclosure, email us at customerservice@atleisure.com or chat with us at https://help.atleisure.com.
| How to Replace Batteries We recommend that you change the battery in your solar light umbrella every year or when you feel the light output is diminished. For best results buy (1) 18650 Lithium 2000mAh rechargeable battery same as supplied with panel. Install only new batteries. 00mAh rechargeable battery same as supplied with panel.
Page 12
For assistance with assembly, parts, or customer service, please contact: ATLeisure, LLC 8 AM – 5 PM, Monday - Friday, EST Email: customerservice@atleisure.com or Chat: https://help.atleisure.com DO NOT RETURN TO STORE 2023 Distributed by Menard, Inc., Eau Claire, WI 54703 Made in China...