Advertisement
10' Offset Umbrella
Assembly & Care Instructions
SKU #: 272-0950
Model #: UMB-952210
IMPORTANT : RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
The schematics in this manual are for assembly and operation illustration only.
They may differ from the actual appearance.
For assistance with assembly, parts, or customer service, please contact:
ATLeisure, LLC
Toll Free: 1-855-880-7205 (English is offered)
8am - 5pm, Monday through Friday, Eastern Standard Time
Email: customerservice@atleisure.com or visit our website at www.atleisure.com
DO NOT RETURN TO STORE
2020 Distributed by Menard, Inc., Eau Claire, WI 54703
Made in China
Advertisement
Related Manuals for Backyard Creations UMB-952210
Summary of Contents for Backyard Creations UMB-952210
- Page 1 10’ Offset Umbrella Assembly & Care Instructions SKU #: 272-0950 Model #: UMB-952210 IMPORTANT : RETAIN FOR FUTURE REFERENCE READ CAREFULLY The schematics in this manual are for assembly and operation illustration only. They may differ from the actual appearance.
-
Page 2: Table Of Contents
Contents Canopy Care ....... . 2 Warnings and Cautions ......2 Preparation . -
Page 3: Preparation
Preparation Remove all protective materials. Be careful not to throw away small parts such as bolts, washers, etc., that may be wrapped in the protective materials. Before assembling make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product. -
Page 4: Umbrella Assembly
Assembly Step 1: Place the upper cross leg (D) on top of the lower cross leg (C). Step 2: Attach the holder pole (F) to the cross legs using the bolts (GG) and washers (HH) as shown above. Hand tighten only. Adjust the holder pole (F) to be sure that it is positioned correctly on the base and tighten the bolts. - Page 5 Assembly (continued) Pins Step 3: Insert the main pole of the Umbrella Frame with Canopy (N) into the Holder Pole (F) until the lower fixed stop pins rest on top of the Holder Pole ring. Tighten the two control knobs to secure the main pole. Use the appropriate anchors to permanently attach the base to your wooden deck or concrete patio or use patio stones or an offset umbrella base (sold separately) to weigh down the umbrella base.
-
Page 6: Umbrella Operation
Umbrella Operation Step 1: Unfasten the storage straps around the canopy. Step 2: Unlock the extension arm clamp (K) and the vertical lift mechanism clamp (H). Extend the umbrella extension arm outwards while lifting the vertical lift mechanism upwards. This will fully extend the umbrella. - Page 7 Umbrella Operation (continued) Lock Cover (G) Step 3: When the umbrella arm is full extended, lock the two clamps (K and H). Slide the lock cover (G) into the locking mechanism on the back side of the vertical lift mechanism. Step 4: To open, turn the crank handle (J) clockwise to open the umbrella completely.
- Page 8 Umbrella Operation (continued) CRITICAL STEP Lock Cover (G) Step 5: Slide back the lock cover (G) away from the vertical lift mechanism before lowering the umbrella. WARNING: Failure to slide back the lock cover (G) away from the vertical lift mechanism before lowering the umbrella arm will cause non-repairable damage to the locking parts (K and H).
-
Page 9: Warranty
Warranty ONE YEAR WARRANTY This product is covered under a manufacturer’s one year warranty from date of purchase against defects in materials and workmanship. This warranty does not cover damage due to neglect, abuse or weather related damage. For full warranty disclosure, email us at customerservice@atleisure.com, call toll free at 1-855-880- 7205 or send mail to: 1040 Boulevard SE Ste. - Page 12 ATLeisure, LLC 1040 Boulevard SE, Suite B Atlanta, Georgia 30312, USA Customer Service Toll Free 1-855-880-7205 8am - 5pm Eastern Time, Monday through Friday www.atleisure.com 2020 Distributed by Menard, Inc., Eau Claire, WI 54703 Made in China...