Related Manuals for Furniture of America CM-BK613
Summary of Contents for Furniture of America CM-BK613
- Page 6 1. Insert 2 barrel nuts (#D) into each end along the side rails (#4,5), then align those side rails to the headboards (#1,2). 2. Insert 2 bolts (#A) into each end along the headboards (#1,2). Make sure to insert those bolts into the barrel nuts.
- Page 7 1. Align the support legs (#6) to the designated holes, then insert 2 bolts (#F) into the top holes and 2 bolts (#B) into the bottom holes. Secure using the Allen wrench (#I). 2. Insert a bolt (#B) and secure using the Allen wrench.
- Page 8 Align those connection irons (#H) to the holes along the inner sides, then insert a screw (#G) into each. Secure. Align the back guardrail (#14) to the holes along the support legs (#6), then insert a screw (#F) into each hole. Secure using a screwdriver.
- Page 9 Carefully place the twin slat kits (#15) onto the side rails, then insert a screw (#F) into each hole. Secure using a screwdriver. ASSEMBLY IS COMPLETED...
Need help?
Do you have a question about the CM-BK613 and is the answer not in the manual?
Questions and answers