Table of Contents
Advertisement
Microphone module
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Turn off the computer and remove all connected devices and cables.
2. Remove the computer stand cover. See "Computer stand cover" on page 59.
3. Remove the computer stand. See "Computer stand" on page 60.
4. Remove the optical drive. See "Optical drive" on page 61.
5. Remove the computer cover. See "Computer cover" on page 64.
6. Remove two screws from the middle frame.
7. Remove the microphone module and microphone cable from the middle frame.
8. Remove the microphone bracket.
9. Install the new microphone module.
10. Reinstall the removed parts in reverse order of the removal steps mentioned above.
68
IdeaCentre AIO 3 Hardware Maintenance Manual
Advertisement
Table of Contents
