Optical Drive; Storage Drive - Lenovo 22ADA6 Hardware Maintenance Manual

Optical drive

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Disconnect the data cable and power cable from the rear of the optical drive.
2. Press the release button and push the optical drive straight out of the front of the chassis.
3. Remove two screws to detach the optical drive bracket from the optical drive.
4. Install the optical drive bracket on the optical drive.
5. Install the optical drive and reconnect the cables.
6. Reinstall all the removed parts.
7. Reconnect the power cord and all disconnected cables to the computer.

Storage drive

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data.
When handling the internal storage drive, observe the following guidelines:
.
Chapter 6 Hardware removal and installation
61