• Remove the heat sink and gaskets. See "Heat sink and gaskets" on page 58.
• Remove the speaker. See "Speaker" on page 59.
• Remove the system board. See "System board" on page 62.
• Remove the optical drive housing. See "Optical drive housing" on page 64.
Removal steps
Microphone module
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
For access, remove the following parts in order:
• Remove the computer stand. See "Computer stand" on page 49.
70
ThinkCentre neo 50a 24 Gen 3 Hardware Maintenance Manual