Camera Module - Lenovo 22ADA6 Hardware Maintenance Manual

Camera module

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Turn off the computer and remove all connected devices and cables.
2. Remove the computer stand cover. See "Computer stand cover" on page 59.
3. Remove the computer stand. See "Computer stand" on page 60.
4. Remove the optical drive. See "Optical drive" on page 61.
5. Remove the computer cover. See "Computer cover" on page 64.
6. Remove four screws to detach the camera module from the computer cover.
7. Remove two screws to detach the camera holder.
66
IdeaCentre AIO 3 Hardware Maintenance Manual