Integrated Camera And Microphone Module - Lenovo ThinkCentre M90a Gen 3 Hardware Maintenance Manual

Note: After installing a new coin-cell battery, reset the system date and time in the UEFI BIOS menu.

Integrated camera and microphone module

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the following parts in order, if any:
• "Computer stand" on page 52.
• "System board" on page 50.
• "System board shield" on page 57.
• "VESA mount bracket" on page 58.
2. Disconnect the integrated camera and microphone module cable from the system board.
Removal procedure
CAUTION:
Do not pull out the integrated camera and microphone module cable with force; otherwise, the cable
may be damaged.
72
M90a Gen 3 and M90a Pro Gen3 Hardware Maintenance Manual