Table of Contents
Advertisement
7.9 "Clean water cycle" option - Display reads "CL"
7.10 "Thermostop" option - Display reads "tS"
7.11 Fast/eco starting option - Display reads "Fi"
When this option is activated, the appliance pumps out all
the water from the tank and then refills it with clean water
at every wash cycle. How long this operation takes depends
on the washing water temperature.
Press
"on" = the minimum temperature of rinse as set,
independently from the intake water temperature, the
nominal duration of cycle may be extended by a few
seconds.
"off" = the minimum temperature of rinse may be a few
degrees lower than the set one, if hot intake water is not
used.
Press
Fast (FS): it allows to start the machine in less time than
the standard; it involves a greater water consumption at
the first start.
Eco starting (EC): the machine starts in standard time,
without any additional water consumption.
Press
19
to enable (On)/disable (OF)
to enable (On)/disable (OF)
to enable (On)/disable (OF)
Advertisement
Table of Contents
