Table of Contents
Advertisement
Procedure to disassemble the filters made of 2 filtering elements:
it is not necessary to remove the lower spray arm.
a- Rotate filter "C", lift it and separate it by extracting the central part "D"
Filter "C" can have different depths, according to the model.
When removing the filters, do not let the coarse residues fall into the basin under the filters; clean and
rinse them thoroughly, then re-insert them correctly; do not use sharp or pointed objects.
If present, clean any limescale deposit to prevent accumulation;
-
When not in use, leave the door ajar if possible;
Clean the surfaces with a damp cloth accurately and frequently; use neutral, non-abrasive detergents,
which do not contain chlorine based substances, or products that corrode and damage stainless steel.
Do not use the products described above to clean the floor under the dishwasher or near it, to prevent the
steam or drops to damage the steel surfaces.
IMPORTANT: the dishwasher automatically starts the "P0"program at the beginning of the day, if there is
water left in the tank and this is under the temperature of 40°C.
28
Advertisement
Table of Contents
