Table of Contents
Advertisement
Figure 37
Figure 38
11.11 Lift the nose batten string up, then pull it sideways and down, so that the nose batten tip lowered
from the top of the keel tube (fig. 39).
11.12 Pull the sail out away from the keel until it is even on top and bottom. Roll the sail gently and
carefully, parallel to the trailing edge of the front and then outboard portion of the sail (fig. 40).
Figure 39
Figure 40
NOTE:
Try to roll the sail in such a way that the leading edge portion remains as smooth as possible. Do not
attempt to stuff the sail between the Mylar pocket and the leading edge tube at any point where you feel
resistance, and do not attach the Velcro ties so tight so as to induce creases in the Mylar or leading edge
sail material.
11.13 Install the wing tip cover bags.
11.14 Put all battens in the batten bag and stow them in the front part of the glider, next to the kingpost
(fig. 41)
Figure 41
Figure 42
17
Advertisement
Table of Contents
