Sony NXCAM HXR-NX80 Operating Manual page 93

5
Select the SSID of a smartphone
that has tethering mode enabled.
If the smartphone SSID is not displayed,
select [Manual setting] and configure
settings manually (p. 80).
6
Select [WIRELESS TC LINK] t
[ON] t [OK].
7
Select [Register].
• The smartphone connection starts.
• When connection is successful, you will
be able to search for cameras using
"Content Browser Mobile"·on the
smartphone.
8
(NETWORK SET) t
Select
[WIRELESS TC LINK].
The network connection starts. The
status of the network connection is
displayed using the following icons.
Icon Meaning
Before wireless LAN
connection and after
disconnection
Wireless LAN connected
9
Start timecode synchronization
from the smartphone.
"TC has been synced." appears on the
screen when synchronization is
successful.
b Notes
• There may be an offset of several frames
after timecode synchronization.
• The timecode advance may become non-
contiguous at the instant the timecode is
synchronized. If this occurs, the timecode
output on HDMI OUT will also be non-
contiguous.
• Timecode synchronization is not performed
if a camera is currently recording, in order
to maintain a contiguous timecode.
• For lengthy continuous recording, periodic
timecode synchronization cannot be
performed, which may lead to an offset of
several frames per hour.
• When a camera is turned off, Wireless TC
LINK also stops. When the camera is turned
on again, Wireless TC LINK is
automatically executed.
10
To exit Wireless TC LINK, press
the MENU button.
b Notes
• The timecode continues to advance
contiguously when Wireless TC LINK is
stopped. To synchronize the timecode once
only at the start, stop Wireless TC LINK
before use after synchronizing the timecode.
• After Wireless TC LINK is stopped, you
can execute Wireless TC LINK again by
performing only step
procedure.
b Notes
• The Wireless TC LINK function is not available
when using the camcorder in the following
states.
– During movie recording/playback
– During thumbnail display
– SLOW & QUICK (S&Q MOTION, SUPER
SLOW MOTION)
– When executing other network functions
– AIRPLANE MODE
• The following functions are not available when
Wireless TC LINK is running.
– Menu operations
– Touch operation of the LCD screen
– DATE REC
– LOCK-ON AF
– FACE DETECTION
– COLOR BAR
– D. EXTENDER
– S&Q MOTION
9
again in the above
Continued ,
93