Recording With The Slow & Quick Motion Function - Sony NXCAM HXR-NX80 Operating Manual

2 Select [PRESET].
3 Select the first two digits. You can set
the timecode within the following
range.
When [60i] is selected:
00:00:00:00 to 23:59:59:29
• When setting 24p, you can set the last 2
timecode digits of the frames in multiples of
4, between 0 and 23.
When [50i] is selected:
00:00:00:00 to 23:59:59:24
4 Set other digits by repeating step 3.
5 Select [OK].
To reset the timecode
Select [RESET] in step 2 of "Setting the
timecode" to reset the timecode
(00:00:00:00).
To reset the timecode using the
Wireless Remote Commander
Press the TC RESET button on the Wireless
Remote Commander to reset the timecode
(00:00:00:00).
Setting the user bits
1 Press the MENU button, and select
(TC/UB SET) t [UB PRESET].
2 Select [PRESET].
3 Select the first two digits.
4 Set other digits by repeating step 3.
5 Select [OK].
To reset the user bits
Select [RESET] in step 2 of "Setting the
user bits" to reset the user bits (00 00 00
00).
Recording with the Slow &
Quick Motion function
By recording with a frame rate that is
different from the playback frame rate, you
can record images to be played back as
slow motion or quick motion images. The
images recorded with the Slow & Quick
Motion function will appear smoother than
slow or fast-forward playback of images
recorded at normal speed.
Preparation
You must set the recording format and
frame rate. The playback speed is
determined by the combination.
1 Press the MENU button, and select
(CAMERA SET) t [SLOW &
QUICK] t [S&Q MOTION] t [REC
FORMAT].
2 Set the recording format.
3 Select [FRAME RATE].
4 Set the frame rate.
To record with the Slow & Quick
Motion function
1 Press the ASSIGN1/S&Q button
repeatedly to display [S&Q MOTION]
on the screen.
2 Press the START/STOP button.
Slow & Quick Motion recording starts.
3 To stop, press the START/STOP button
again.
z Tip
• You can also press the MENU button and select
(CAMERA SET) t [SLOW & QUICK]
t [S&Q MOTION] t [EXECUTE] to switch
to Slow & Quick Motion shooting mode.
To change the frame rate setting
Press and hold the ASSIGN1/S&Q button
for about 1 second, then change the value.
59
Continued ,