Sony NXCAM HXR-NX80 Operating Manual page 61

slow motion images. The images recorded
with the Super Slow Motion function will
appear smoother than slow playback of
images recorded at normal speed.
Preparation
You must set the recording format and
frame rate. The playback speed is
determined by the combination. You also
must set the record timing.
1 Press the MENU button, and select
(CAMERA SET) t [SLOW &
QUICK] t [SUPER SLOW
MOTION].
2 Select [REC FORMAT], and select the
recording format.
3 Select [FRAME RATE], and select the
frame rate.
4 Select [REC TIMING], and select the
record timing.
Record button
END TRIGGER
END TRIGGER
HALF
To record with the Super Slow
Motion function
1 Press the ASSIGN1/S&Q button
repeatedly to display [SUPER SLOW
MOTION] on the screen.
START TRIGGER
Time axis
2 Press the START/STOP button.
Super Slow Motion recording starts.
z Tip
• You can also press the MENU button and select
(CAMERA SET) t [SLOW & QUICK]
t [SUPER SLOW MOTION] t
[EXECUTE] to switch to Super Slow Motion
shooting mode.
To determine the recording time
manually
When [REC TIMING] is set to [START
TRIGGER], press the START/STOP button
again while recording to stop recording.
To change the frame rate setting
Press and hold the ASSIGN1/S&Q button
for about 1 second, change the setting using
the v/V/b/B/SET button, and then press
the v/V/b/B/SET button to apply the
setting.
When you want to abort recording
Select [Cancel] on the screen during
recording to abort recording.
Recording stops and the captured content is
not saved. This is useful when you want to
shoot again immediately.
To cancel Super Slow Motion
recording
Press the ASSIGN1/S&Q button or the
MENU button during standby.
Estimated recording time for [REC
TIMING] and [FRAME RATE] settings
The recording time varies depending on the
record timing and frame rate settings. The
following table shows estimates of
recording time for various values.
61
Continued ,