Introduction
Projector Features
The projector integrates high-performance optical engine projection and a user - friendly
design to deliver high reliability and ease of use.
The projector offers the following features:
®
• DLP
technology
• DS272/DS27BAA/MS580/BS570 series: 800 x 600 SVGA resolution
• DX273/DX27CAA/MX581/BX571/DX283-ST/DX28CAA/MX595ST/BX585ST
series: 1024 x 768 XGA resolution
• DW275/DW27EAA/MW584/BW572/DW284-ST/DW28DAAST/MW596ST/
BW586ST series: 1280 x 800 WXGA resolution
• DH278/DH27HAA/MH588/BH577 series: 1920 x 1080 1080P resolution
• Compatibility with Macintosh
• Compatibility with NTSC, PAL, SECAM and HDTV
• D-Sub 15-pin terminal for analog video connectivity
• User-friendly, multi-language on-screen display
• Advanced electronic keystone correction
• RS-232 connector for serial control
• Less then 0.5w power consumption in standby mode.
• Dynamic ECO starts your dynamic power saving
• Quick Cooling, Auto Power Off, Auto Power On functions
• Instant Restart function enables to restart the projector immediately within 90
seconds after turning it off.
• 3D Function supported
Note
•
The information in this manual is subject to change without notices.
•
The reproduction, transfer or copy of all or any part of this document is not permitted
without express written consent.
•
The apparent brightness of the projected image will vary depending on the ambient
lighting conditions, selected input signal contrast/brightness settings, and the
projection distance.
•
The lamp brightness will decline over time and may vary within the lamp manufacturers
specifications. This is normal and expected behavior.
http://www.pureglare.com.au
®
computers
1