Adjusting The Projector Height; Adjusting The Projector Focus And Zoom - Vivitek DS272 Series User Manual

Adjusting the Projector Height

Rear adjuster foot
The projector is equipped with 1 front adjuster foot and 2 rear adjuster feet.
These adjusters change the image height and projection angle.
1. Pull the quick-release lever and lift the front of the projector. Once the image is
positioned where you want it, release the quick-release lever to lock the foot in
position. You may also screw the front adjuster foot to change the image height.
2. Use the rear adjuster foot to fine tune the horizontal angle.
To retract the foot, screw the adjuster foot in a reverse direction.
Note
•
To avoid damaging the projector, make sure that the adjuster feet are fully retracted
before placing the projector in its carrying case.

Adjusting the Projector Focus and Zoom

1. Focus the image by rotating the focus ring. A still image is recommended for focusing.
2. Adjust the image size by sliding the zoom ring.
http://www.pureglare.com.au
Rear adjuster foot
Front adjuster foot
Focus ring
Zoom ring
15