Table of Contents
Advertisement
Securing the projector
Setting and changing a password
1. Open the OSD menu, go to the SETTINGS 2 > Security Settings menu and
press Enter.
2. Highlight Change Password and press Enter.
3. To set the password:
According to the password you desire to set, press the arrow keys to enter six dig-
its for the password.
4. To change the password:
You will be asked to input current password first and then you can change a new
one.
5. Confirm the new password by re-entering the password.
6. To leave the OSD menu, press Menu/Exit.
Activating the password function
1. Go back to SETTINGS 2 > Security Settings and press Enter.
2. Highlight Change Security and press Enter. You will be asked to input password.
Once the password is set, the OSD menu returns to the Power on Lock. Select
On by pressing
3. To disable password protection, select Off in the Power on Lock menu.
http://www.pureglare.com.au
/ .
20
Advertisement
Table of Contents
