Figure 14. Remove the 40-pin I/O board cable
Go to
https://support.lenovo.com/partslookup
replacement part:
40-pin I/O board cable
Remove the battery pack
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 35
"Remove the 40-pin I/O board cable" on page 36
Step 1.
Remove four screws, and then remove the battery pack.
Attention: Ensure that the battery pack cable is disconnected prior to the removal of the battery
pack.
Figure 15. Remove four screws and the battery pack
to look up the Lenovo part numbers of the following
.
Chapter 5
Removing a FRU or CRU
37