Chapter 6
8. Click Save.
6. 10. LEDs Control
The LEDs indicate AP device's activities and behavior. You can turn on or turn off the AP
device's LEDs from the web-based management page.
1. Visit http://tplinkap.net, and log in with the username and password you set for the
AP device.
2. Click the
LED On
or
displays that the LEDs is on and you can click it to turn off the LEDs. The icon
displays that the LEDs is off and you can click it to turn on the LEDs.
6. 11. Mode Switch
The AP device has four operation modes. And you can change the mode of AP device
by using the mode switch icon on the web-based management page.
1. Visit http://tplinkap.net, and log in with the username and password you set for the
AP device.
2. Click the
Mode
icon
by-step on-screen instructions to complete the configuration.
LED Off
icon on the top right corner of the page. The icon
on the top right corner of the page. And then follow the step-
42