Control Leds - TP-Link TL-WA1201 User Manual

Chapter 8
2 ) Select the correct
local time zone.
3 ) Select the correct
local time zone.
4 ) Click SAVE.
8. 2.

Control LEDs

The LEDs of access point indicate its activities and status. You can turn off the LEDs
when you don't need them.
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to System > LED
3. Turn off the LEDs when you don't need them.
• If you want to turn off LEDs immediately, turn off
• If you want to turn off LEDs during a specific time period, follow the steps below:
1 ) Enable LED Status
Start date and time when daylight saving time starts at your
End date and time when daylight saving time ends at your
Control.
and Night Mode.
Manage Your Access Point
LED Status.
45