Using The Navigation Keys - Dell UltraSharp 38 User Manual

2
Shortcut
functions
NOTE: After you change the settings, press the joystick to save the changes
before proceeding to another function or exiting.
3
Exit

Using the navigation keys

When the OSD main menu is active, move the joystick to configure the settings,
following the navigation keys displayed below the OSD.
After you change the settings, press the joystick to save the changes before
proceeding to another menu or exiting the OSD menu.
NOTE: To exit the current menu item and return to the previous menu,
move the joystick to the left until you exit.
When you move the joystick to the left or right to
toggle between the shortcut functions, the selected
item will be highlighted and shifted to the center
position. Press the joystick to enter its submenu.
• USB Switch: To switch between the USB
upstream sources in PIP/PBP mode.
• Input Source: To choose an input source from the
list of video signals that may be connected to your
monitor.
• Preset Modes: To choose a preferred color mode
from the list of preset modes.
• Brightness/Contrast: To access the adjustment
sliders of brightness and contrast.
• PIP/PBP Mode: To choose a PBP or PIP mode
from the preset list, which provides different sizes
and positions of the sub-window.
To exit the Menu Launcher.
Operating the monitor
│
57