Electrical Specifications - Dell UltraSharp 38 User Manual

Electrical specifications

Model
Video input signals
AC input voltage/
frequency/current
Inrush current
Power consumption
*Supports up to WQHD+ 3840 x 1600 60 Hz TMDS as per specified in HDMI 2.1.
**HBR3/DisplayPort 1.4/DP audio is supported.
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting with maximum power loading on all USB
ports.
3
P : Power consumption of On mode as defined in Energy Star 8.0 version.
on
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
U3824DW
• HDMI 2.1 (TMDS)*/DisplayPort 1.4**, 600 mV for
each differential line, 100 ohm input impedance per
differential pair
• USB-C DP Input (DP-Alt Mode), 600 mV for each
differential line, 90 ohm input impedance per
differential pair
100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 3.2 A
(typical)
• 120 V: 40 A (Max.) at 0°C (cold start)
• 240 V: 80 A (Max.) at 0°C (cold start)
• 0.3 W (Off Mode)
• 0.4 W (Standby Mode)
• 0.9 W (Networked Standby Mode)
• 34.8 W (On Mode)
2
• 245 W (Max.)
3
• 31.47 W (P )
on
• 100.36 kWh (TEC)
1
1
1
1
3
About your monitor
│
19