2
Shortcut key/
Brightness/Contrast
3
Shortcut key/
PIP/PBP
4
Shortcut key/
USB Switch
5
Shortcut key/
Input Source
6
Menu
7
Exit
Using the navigation keys
When the OSD main menu is active, move the joystick to configure the settings,
following the navigation keys displayed below the OSD.
After you change the settings, press the joystick to save the changes before
proceeding to another menu or exit the OSD menu.
NOTE: To exit the current menu item and return to the previous menu,
move the joystick to the left until you exit.
Select this icon to adjust the brightness and
contrast level.
Select this icon to set PIP/PBP.
Select this icon to switch between the USB
upstream sources in PIP/PBP mode.
Select this icon to set the Input Source.
Select this icon to launch the On-Screen Display
(OSD). See
Accessing the menu
Select this icon to exit the OSD main menu.
Operating the monitor
system.
│
53