Speakers Specific Problems - Dell UltraSharp 38 User Manual

Super speed USB
10 Gbps (USB 3.2
Gen2) interface is
slow
Wireless USB
peripherals stop
working when a
USB 3.2 device is
plugged in

Speakers specific problems

Specific
symptoms
No sound coming
from the external
speakers
Super speed USB
10 Gbps (USB 3.2
Gen2) peripherals
working slowly or
not working at all
Wireless USB
peripherals
responding slowly
or only working as
the distance
between itself and
its receiver
decreases
What you
experience
Cannot hear any
sound
• Check that your computer is super
speed USB 10 Gbps (USB 3.2 Gen2)-
compatible.
• Some computers have USB 3.2, USB
2.0, and USB 1.1 ports. Ensure that the
correct USB port is used.
• Reconnect the upstream cable to your
computer.
• Reconnect the USB peripherals
(downstream connector).
• Reboot the computer.
• Increase the distance between the
USB 3.2 peripherals and the wireless
USB receiver.
• Position your wireless USB receiver as
close as possible to the wireless USB
peripherals.
• Use a USB-extender cable to position
the wireless USB receiver as far away
as possible from the USB 3.2 port.
Possible solutions
• Turn Off the monitor, unplug the
monitor power cord, replug it, and then
turn On the monitor.
• Ensure the audio cable is connected
correctly between the Audio Line Out
port and the external speaker.
• Disconnect/reconnect the audio cable
from the Audio Line Out port and the
external speaker.
• Reset the monitor to factory settings.
Troubleshooting
│
95