Auto Select for
USB-C
Rename Inputs Allows you to specify a preset input name for the
Reset Input
Source
│
60
Operating the monitor
Allows you to set this function to:
• Prompt for Multiple Inputs: Always displays the
"Switch to USB-C Video Input" message for you
to choose whether to switch or not.
• Yes: Always switches to USB-C video input
(without asking) when the USB Type-C cable is
connected.
• No: Never automatically switches to USB-C video
input when the USB Type-C cable is connected.
Press the joystick to confirm the selection.
NOTE: The option is available only when Auto
Select is on.
selected input source. The preset options are PC,
PC 1, PC 2, Laptop, Laptop 1, and Laptop 2. The
default setting is Off.
NOTE: When you perform a rename for the USB-C
input, the wattage value remains after the specified
option, e.g., PC 1
NOTE: It is not applicable for the input names shown
in the warning messages and Display Info.
Resets your monitor input settings to the factory
settings.
90W.